/usr/src/kernels/4.18.0-553.52.1.el8_10.x86_64/include/linux/fsl/ Current File: //usr/src/kernels/4.18.0-553.52.1.el8_10.x86_64/include/linux/fsl/ptp_qoriq.h
// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2010 OMICRON electronics GmbH
 * Copyright 2018 NXP
 */
#ifndef __PTP_QORIQ_H__
#define __PTP_QORIQ_H__

#include <linux/io.h>
#include <linux/ptp_clock_kernel.h>

/*
 * qoriq ptp registers
 * Generated by regen.tcl on Thu May 13 01:38:57 PM CEST 2010
 */
struct qoriq_ptp_registers {
	u32 tmr_ctrl;     /* Timer control register */
	u32 tmr_tevent;   /* Timestamp event register */
	u32 tmr_temask;   /* Timer event mask register */
	u32 tmr_pevent;   /* Timestamp event register */
	u32 tmr_pemask;   /* Timer event mask register */
	u32 tmr_stat;     /* Timestamp status register */
	u32 tmr_cnt_h;    /* Timer counter high register */
	u32 tmr_cnt_l;    /* Timer counter low register */
	u32 tmr_add;      /* Timer drift compensation addend register */
	u32 tmr_acc;      /* Timer accumulator register */
	u32 tmr_prsc;     /* Timer prescale */
	u8  res1[4];
	u32 tmroff_h;     /* Timer offset high */
	u32 tmroff_l;     /* Timer offset low */
	u8  res2[8];
	u32 tmr_alarm1_h; /* Timer alarm 1 high register */
	u32 tmr_alarm1_l; /* Timer alarm 1 high register */
	u32 tmr_alarm2_h; /* Timer alarm 2 high register */
	u32 tmr_alarm2_l; /* Timer alarm 2 high register */
	u8  res3[48];
	u32 tmr_fiper1;   /* Timer fixed period interval */
	u32 tmr_fiper2;   /* Timer fixed period interval */
	u32 tmr_fiper3;   /* Timer fixed period interval */
	u8  res4[20];
	u32 tmr_etts1_h;  /* Timestamp of general purpose external trigger */
	u32 tmr_etts1_l;  /* Timestamp of general purpose external trigger */
	u32 tmr_etts2_h;  /* Timestamp of general purpose external trigger */
	u32 tmr_etts2_l;  /* Timestamp of general purpose external trigger */
};

/* Bit definitions for the TMR_CTRL register */
#define ALM1P                 (1<<31) /* Alarm1 output polarity */
#define ALM2P                 (1<<30) /* Alarm2 output polarity */
#define FIPERST               (1<<28) /* FIPER start indication */
#define PP1L                  (1<<27) /* Fiper1 pulse loopback mode enabled. */
#define PP2L                  (1<<26) /* Fiper2 pulse loopback mode enabled. */
#define TCLK_PERIOD_SHIFT     (16) /* 1588 timer reference clock period. */
#define TCLK_PERIOD_MASK      (0x3ff)
#define RTPE                  (1<<15) /* Record Tx Timestamp to PAL Enable. */
#define FRD                   (1<<14) /* FIPER Realignment Disable */
#define ESFDP                 (1<<11) /* External Tx/Rx SFD Polarity. */
#define ESFDE                 (1<<10) /* External Tx/Rx SFD Enable. */
#define ETEP2                 (1<<9) /* External trigger 2 edge polarity */
#define ETEP1                 (1<<8) /* External trigger 1 edge polarity */
#define COPH                  (1<<7) /* Generated clock output phase. */
#define CIPH                  (1<<6) /* External oscillator input clock phase */
#define TMSR                  (1<<5) /* Timer soft reset. */
#define BYP                   (1<<3) /* Bypass drift compensated clock */
#define TE                    (1<<2) /* 1588 timer enable. */
#define CKSEL_SHIFT           (0)    /* 1588 Timer reference clock source */
#define CKSEL_MASK            (0x3)

/* Bit definitions for the TMR_TEVENT register */
#define ETS2                  (1<<25) /* External trigger 2 timestamp sampled */
#define ETS1                  (1<<24) /* External trigger 1 timestamp sampled */
#define ALM2                  (1<<17) /* Current time = alarm time register 2 */
#define ALM1                  (1<<16) /* Current time = alarm time register 1 */
#define PP1                   (1<<7)  /* periodic pulse generated on FIPER1 */
#define PP2                   (1<<6)  /* periodic pulse generated on FIPER2 */
#define PP3                   (1<<5)  /* periodic pulse generated on FIPER3 */

/* Bit definitions for the TMR_TEMASK register */
#define ETS2EN                (1<<25) /* External trigger 2 timestamp enable */
#define ETS1EN                (1<<24) /* External trigger 1 timestamp enable */
#define ALM2EN                (1<<17) /* Timer ALM2 event enable */
#define ALM1EN                (1<<16) /* Timer ALM1 event enable */
#define PP1EN                 (1<<7) /* Periodic pulse event 1 enable */
#define PP2EN                 (1<<6) /* Periodic pulse event 2 enable */

/* Bit definitions for the TMR_PEVENT register */
#define TXP2                  (1<<9) /* PTP transmitted timestamp im TXTS2 */
#define TXP1                  (1<<8) /* PTP transmitted timestamp in TXTS1 */
#define RXP                   (1<<0) /* PTP frame has been received */

/* Bit definitions for the TMR_PEMASK register */
#define TXP2EN                (1<<9) /* Transmit PTP packet event 2 enable */
#define TXP1EN                (1<<8) /* Transmit PTP packet event 1 enable */
#define RXPEN                 (1<<0) /* Receive PTP packet event enable */

/* Bit definitions for the TMR_STAT register */
#define STAT_VEC_SHIFT        (0) /* Timer general purpose status vector */
#define STAT_VEC_MASK         (0x3f)

/* Bit definitions for the TMR_PRSC register */
#define PRSC_OCK_SHIFT        (0) /* Output clock division/prescale factor. */
#define PRSC_OCK_MASK         (0xffff)


#define DRIVER		"ptp_qoriq"
#define DEFAULT_CKSEL	1
#define N_EXT_TS	2
#define REG_SIZE	sizeof(struct qoriq_ptp_registers)

struct qoriq_ptp {
	struct qoriq_ptp_registers __iomem *regs;
	spinlock_t lock; /* protects regs */
	struct ptp_clock *clock;
	struct ptp_clock_info caps;
	struct resource *rsrc;
	int irq;
	int phc_index;
	u64 alarm_interval; /* for periodic alarm */
	u64 alarm_value;
	u32 tclk_period;  /* nanoseconds */
	u32 tmr_prsc;
	u32 tmr_add;
	u32 cksel;
	u32 tmr_fiper1;
	u32 tmr_fiper2;
};

static inline u32 qoriq_read(unsigned __iomem *addr)
{
	u32 val;

	val = ioread32be(addr);
	return val;
}

static inline void qoriq_write(unsigned __iomem *addr, u32 val)
{
	iowrite32be(val, addr);
}

#endif